We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Almond NEMA L5-20P locking plug, polycarbonate body, brass blades

TeKit

TeKit L5-20P 20A 125V 60Hz Locking Plug Almond computer power cord

SKU CH-VDF5-RHBZZ

A 20 A 125 V NEMA L5-20P locking plug in almond polycarbonate with brass blades for secure equipment power connections

  • ColorAlmond
  • Changer TypeTekit Industrial Grade 20A 125V Locking Plug, NEMA L5-20P, 2
  • FeaturesTekit Industrial Grade 20A 125V Locking Plug, NEMA L5-20P, 2
  • Locking NEMA L5-20P plug prevents accidental disconnection in critical equipment
  • Rated 20 A at 125 V 60 Hz for high-draw industrial devices
  • Polycarbonate thermoplastic housing resists impacts and heavy force
  • Solid brass blades and contacts deliver low resistance and low heat
  • Deep slotted triple-drive screws simplify DIY installation and cord clamping

NEMA L5-20P Locking Plug

This TeKit plug is a NEMA L5-20P locking connector rated for 20 amps at 125 volts and 60 Hz. It uses a 2-pole, 3-wire grounding configuration built from polycarbonate thermoplastic with solid brass blades and contacts. The almond-coloured housing resists hard impacts and heavy force for industrial-grade durability. Deep slotted triple-drive screws on the face module and cord clamp simplify do-it-yourself installation.

Builders wiring 20 A 125 V equipment

Electricians and IT installers terminating a cord for 20-amp 125-volt loads will find the locking design and UL listing match the requirement. The straight-blade layout suits standard L5-20R receptacles found on PDUs and heavy-duty outlets. Buyers needing a non-locking straight blade, a higher voltage rating, or a different pole count should select another model.

Locking NEMA L5-20P configuration

The single specification that decides fit is the NEMA L5-20P locking interface, which only mates with a matching L5-20R receptacle. If the target outlet uses a different NEMA code or a non-locking blade pattern, this plug will not connect. Confirm the receptacle marking before purchase.

Highlights

  • Locking NEMA L5-20P plug prevents accidental disconnection in critical equipment
  • Rated 20 A at 125 V 60 Hz for high-draw industrial devices
  • Polycarbonate thermoplastic housing resists impacts and heavy force
  • Solid brass blades and contacts deliver low resistance and low heat
  • Deep slotted triple-drive screws simplify DIY installation and cord clamping

Specifications

BrandTEKIT
ModelL5-20P
ColorAlmond
Changer TypeTekit Industrial Grade 20A 125V Locking Plug, NEMA L5-20P, 2P, 3W,Grounding (L5-20P)
FeaturesTekit Industrial Grade 20A 125V Locking Plug, NEMA L5-20P, 2P, 3W,Grounding (L5-20P)

Questions about this item

Should I pick the L5-20P plug or a different NEMA type for my 20 A 125 V circuit?

Choose the L5-20P when your equipment requires a 20 A 125 V locking connection; the NEMA code matches the receptacle on your PDU or outlet.

What does the 20 A rating mean once the plug is wired into my server rack?

It allows a continuous load up to 20 A at 125 V, so the cord can feed high-draw devices without overheating the brass blades.

How does the NEMA L5-20P interface limit what I can connect?

The L5-20P locks into a matching L5-20R receptacle, capping the connection at 20 A 125 V 60 Hz and preventing accidental disconnection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.