We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10ft power cord with locking L5-15P plug and C13 connector

TeKit

TeKit L5-15P to C13 Power Extension Cord 10ft Black

SKU CH-WNJM-6V76Y

A 10 ft black power extension cord with a NEMA L5-15P plug and IEC C13 connector, rated 15 A at 125 V using 18 AWG SJT cable

Length 10 ft.

Color Black

  • Locking L5-15P plug prevents accidental disconnection in busy racks
  • 10 ft length reaches distant PDUs without extra couplers
  • 15 A 125 V rating powers servers and workstations safely
  • 18 AWG 3-wire SJT jacket resists heat up to 105 °C
  • Hi-Pot tested for dielectric strength and correct polarity

NEMA L5-15P to IEC C13 connection

This 10ft power extension cord converts a NEMA L5-15P locking plug to an IEC C13 connector. It supplies 125V at up to 15A using an 18 AWG, three-wire SJT cable with a PVC jacket. The moulded plug and connector are tested for dielectric withstand, polarization and continuity.

10ft length and moulded ends

The 10ft cable provides reach between a locking outlet and equipment with a C14 inlet. Moulded construction secures the connections and resists strain during routine handling. Each cord is verified before packaging to ensure correct wiring and insulation integrity.

15A at 125V capacity

Rated for 15A continuous current at 125V, the cord suits desktop computers, monitors and similar loads with C14 inlets. The 18 AWG conductors limit use to devices within that ampacity; higher-draw equipment or longer runs would exceed the rating. The jacket is rated to 105°C for typical indoor environments.

Highlights

  • Locking L5-15P plug prevents accidental disconnection in busy racks
  • 10 ft length reaches distant PDUs without extra couplers
  • 15 A 125 V rating powers servers and workstations safely
  • 18 AWG 3-wire SJT jacket resists heat up to 105 °C
  • Hi-Pot tested for dielectric strength and correct polarity

Specifications

No published specifications for this item yet.

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 18 AWG conductors or the PVC jacket rated at 105 °C need replacement under normal indoor use?

The cord uses 18 AWG three-wire SJT cable with a PVC jacket rated for 105 °C; no periodic replacement is required unless the jacket or moulded ends show physical damage.

What is the first limit reached when the cord runs continuously at full load?

The 15 A / 125 V rating is the governing limit; sustained current above 15 A will exceed the cord's rated capacity before any thermal or voltage-drop threshold is met.

How warm does the 18/3 SJT cable get when powering equipment all day at 15 A?

At the rated 15 A the conductors operate within the 105 °C jacket temperature rating, so the cable remains safe to touch under normal ambient conditions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.