TeKit JD3269 NEMA 5-15P to 4× C13 Y-splitter 2 m

Four-device power splitter for C13 equipment

This TeKit JD3269 cable splits one NEMA 5-15P wall plug into four C13 female connectors, letting you run up to four monitors, PCs or printers from a single outlet. The two-metre Y-splitter design keeps each branch short enough to avoid strain on monitor-arm installations while freeing space on power strips or PDUs. Rated for 125 V at 10 A, it suits office, healthcare, education and OEM environments where multiple C13 devices share one circuit.

Check your outlet and device plugs before ordering

Verify that your wall socket or power strip accepts a standard NEMA 5-15P three-prong plug and that every device you intend to connect uses a C13 inlet. Ensure the combined load of all four devices stays within the 10 A rating of the splitter and the capacity of the upstream circuit. The cable uses 16 AWG conductors on the supply side and 18 AWG on each C13 branch, so confirm your equipment’s power cords are compatible with those gauges.

Replaces four separate cords

If you currently run individual cords from each monitor or device to a power strip, this Y-splitter consolidates them into one feed, reducing clutter and freeing three outlets on the strip or PDU. The jump is worth it when you need a tidy, strain-free run to four C13 inlets — especially on monitor arms — and your total draw remains under 10 A at 125 V. It does not suit setups requiring higher amperage, non-C13 connectors or longer individual branch lengths.