TeKit IEC C14 to AU SAA Power Adapter 1.5m 10A 250V

C14-to-Australia adapter for rack gear

This 1.5 m cord converts an IEC 320 C14 inlet into a standard Australian three-pin socket, letting rack-mounted PDUs, PSUs or UPS units power local equipment without rewiring. The H05VV-F 3G1.5 mm² oxygen-free copper conductors are rated for 10 A at 250 V. Supplied as a single black cable ready for immediate use.

Suits installers adapting C14 outlets

Ideal for data-centre technicians, lab managers or AV integrators who need to connect Australian-pattern devices to existing C14 distribution strips. Not suitable for appliances drawing more than 10 A, for permanent building wiring, or for regions using different socket standards. Buyers requiring longer reach or higher current capacity should look at alternative cable assemblies.

Handles typical IT loads up to 10 A

Comfortably powers servers, switches, monitors and workstation PSUs that draw within the 10 A rating at 250 V. The 16 AWG copper cores provide low resistance over the 1.5 m length. Headroom disappears with high-draw heaters, large laser printers or daisy-chained loads that exceed the rated current, causing voltage drop or thermal stress.