We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit IEC-60320 C14 Right-Angle to C13 Power Extension Cord 10 ft 14 AWG 15A

SKU CH-8KAV-EXK8H

A 10 ft heavy-duty extension cord with a right-angle C14 plug and straight C13 socket, rated 14 AWG for 15 A at 100-250 V

  • TypeAC Power Cord C14 Right Angle to C13 For TV, Computer ETC
  • ColorBlack
  • Length3.3 ft.
  • Connector Number2
  • Connector DetailAC Power Cord C14 Right Angle to C13 For TV, Computer ETC
  • Terminal GenderMale to Female

Length 3.3 ft.

  • 3.3 ft.
  • 6.6 ft.

Struck-through versions exist but are not stocked here.

  • Right-angle C14 plug fits tight rack spaces
  • 14 AWG copper conductors handle 15 A loads
  • SJT jacket provides durable shielding
  • UL listed for safety compliance
  • 10 ft length reaches across rack enclosures

Right-angle C14 connector for tight spaces

This 10 ft extension cord uses a 90 degree IEC-60320 C14 plug on the male end and a straight C13 receptacle on the female end. The right-angle design saves clearance behind rack-mounted servers, PDUs, monitors or desktop computers where rear access is limited. Rated 15 A at 100-250 V with 14 AWG copper conductors, it suits standard data-centre and office power distribution.

Heavy-duty SJT jacket with shielding

The molded SJT outer jacket and internal shielding protect the three copper conductors from physical damage and electromagnetic interference in dense equipment cabinets. UL listing confirms compliance with recognised safety requirements for fixed-installation power cords. The black colour matches typical rack and office aesthetics without adding functional difference.

Verify inlet orientation and cord reach

Before ordering, confirm that the equipment inlet accepts a C14 plug and that the right-angle bend direction matches the available clearance. Measure the path from the power source to the device inlet to ensure the 10 ft length provides sufficient slack without excess cable management. Check that the 15 A rating meets the connected load requirements.

Highlights

  • Right-angle C14 plug fits tight rack spaces
  • 14 AWG copper conductors handle 15 A loads
  • SJT jacket provides durable shielding
  • UL listed for safety compliance
  • 10 ft length reaches across rack enclosures

Specifications

BrandTekit
TypeAC Power Cord C14 Right Angle to C13 For TV, Computer ETC
ColorBlack
Length3.3 ft.
Connector Number2
Connector DetailAC Power Cord C14 Right Angle to C13 For TV, Computer ETC
Terminal GenderMale to Female
SpecificationsAC Power Cord C14 Right Angle to C13 For TV, Computer ETC
ShieldingYes
ConductorCopper Conductor
FeaturesAC Power Cord C14 Right Angle to C13 For TV, Computer ETC

Questions about this item

Will the SJT jacket or copper conductors degrade and need replacement?

The SJT jacket and copper conductors are built for long-term use; no scheduled replacement is required under normal conditions.

What limits continuous operation at the 15 A rating?

The 14 AWG conductors and C13/C14 connectors are rated for 15 A at up to 250 V; sustained loads near that level will hit the cable's ampacity limit first.

Does the right-angle C14 plug run hotter or draw more power than a straight plug?

The right-angle design only changes the physical orientation; it adds no resistance, heat or power draw compared with a straight C14 connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.