We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black and blue cable with 4-pin IDE and 15-pin SATA power connectors

TeKit

TeKit IDE 4-pin to 15-pin SATA power cable .5 ft

SKU CH-9G6K-CXGJF

Converts a legacy 4-pin IDE power connector to a 15-pin SATA power plug in a .5 ft cable

  • TypeIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pi
  • ColorBlack & Blue
  • Length< 1"
  • Connector Number2
  • Connector DetailIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pi
  • Terminal GenderMale to Male
  • Powers SATA drives from legacy IDE headers
  • 5 ft length keeps cable routing tidy
  • Copper conductors deliver reliable current flow
  • Male-to-male connectors join directly without adapters
  • Black and blue jacket aids quick identification

Power conversion for legacy drives

This cable adapts a standard four-pin IDE power connector to a 15-pin SATA power plug. It lets older power supplies feed current SATA hard drives or solid-state drives without a molex-to-SATA adapter chain. The copper conductors handle the required current for typical drive spin-up and steady operation.

Builders with mixed-generation hardware

The short 0.5 ft length suits cramped drive bays or back-to-back drive cages where slack would block airflow. It is not for users who need to bridge a long distance between a power supply and a distant drive cage, nor for builds that require right-angle connectors to clear a side panel.

Stable delivery under continuous load

Copper conductors and male-to-male terminals maintain consistent voltage while a drive runs sustained read or write workloads. The fixed-length design avoids the resistance added by daisy-chained adapters, so the drive receives clean power during extended transfers or RAID rebuilds.

Highlights

  • Powers SATA drives from legacy IDE headers
  • 5 ft length keeps cable routing tidy
  • Copper conductors deliver reliable current flow
  • Male-to-male connectors join directly without adapters
  • Black and blue jacket aids quick identification

Specifications

BrandTekit
TypeIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable
ColorBlack & Blue
Length< 1"
Connector Number2
Connector DetailIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable
Terminal GenderMale to Male
Specifications4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable
ConductorCopper Conductor
FeaturesIDE 4pin Male to 15pin Male connectors SATA Power Cable 15pin to 4pin male connectors sata power cable
Cable Length0.5 ft.
StyleCable

Questions about this item

What power connector must my existing drive or power supply provide for this cable to work?

The cable requires a free 4-pin IDE power connector on the power supply side to deliver power to the SATA device.

Will the .5 ft length reach from a legacy IDE power lead to a SATA drive mounted in a modern case?

At .5 ft the cable is very short, so the IDE power lead and the SATA drive must be close together inside the chassis.

How can I confirm the 15-pin SATA power connection is delivering power after installation?

The SATA drive should spin up and be detected by the BIOS or operating system once the cable is seated on both connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.