We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cord with one C20 plug branching to two C13 sockets, 1.6 ft each leg

TeKit

TeKit C20 to Dual C13 Y-Splitter Power Cord 12AWG C19 Strip Monitor 3ft 1m

SKU CH-4386-8X3VR

A heavy-duty C20 to dual C13 Y-splitter power cord with 12AWG main wire and 14AWG splitter wires, rated 20A/250V for server and PDU power distribution

  • TypeCable Splitters
  • ColorBlack
  • Length1 Foot
  • Connector Number3
  • Connector DetailC20 to dual C13 Splitter cord
  • Terminal GenderMale to Female

Size 3ft

  • One C20 inlet powers two C13 outlets for efficient rack distribution
  • Heavy-duty 12AWG main wire ensures reliable high-current delivery to critical gear
  • 14AWG splitter legs rated 15A at 250V support dual-device loads safely
  • UL-listed construction meets safety standards for professional server environments
  • Compact 1.6 ft split sections keep cable runs tidy in dense cabinets

C20-to-dual-C13 Y-splitter for rack power

This professional Y-splitter takes a single C20 inlet and provides two C13 outlets, letting servers, PDUs, network switches or other rack equipment share one power source. The 1 ft overall length keeps cable runs short and tidy inside dense enclosures. UL listing confirms the assembly meets recognised safety requirements for data-centre use.

20 A main feed with 15 A branch capacity

Heavy-duty 12 AWG conductors carry up to 20 A at 250 V from the C20 plug, while each 14 AWG split leg is rated for 15 A at 250 V. The Y-junction splits 1.6 ft from the inlet, giving each C13 tail 1.6 ft of reach. This headroom suits dual power-supply servers or paired switches, but a single device drawing more than 15 A would exceed the branch rating.

UL-listed safety certification

The cable assembly carries a UL listing, verifying that materials, construction and current ratings have been independently tested for continuous operation in professional environments. Without this mark the splitter would not satisfy typical data-centre procurement policies or electrical-code inspections.

Highlights

  • One C20 inlet powers two C13 outlets for efficient rack distribution
  • Heavy-duty 12AWG main wire ensures reliable high-current delivery to critical gear
  • 14AWG splitter legs rated 15A at 250V support dual-device loads safely
  • UL-listed construction meets safety standards for professional server environments
  • Compact 1.6 ft split sections keep cable runs tidy in dense cabinets

Specifications

BrandTEKIT
TypeCable Splitters
ColorBlack
Length1 Foot
Connector Number3
Connector DetailC20 to dual C13 Splitter cord
Terminal GenderMale to Female
SpecificationsC20 to Dual C13 Splitter Power Cord,Toptekits Heavy Duty C20 Male to 2X C13 Female Y Splitter Cable Power Cord, 20A, 14 AWG
FeaturesC20 to Dual C13 Splitter Power Cord,Toptekits Heavy Duty C20 Male to 2X C13 Female Y Splitter Cable Power Cord, 20A, 14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this C20-to-dual-C13 Y-splitter reach both of my older rack-mount servers from a single PDU outlet?

The total length is 1 ft with 1.6 ft from the C20 plug to the Y-junction and another 1.6 ft from the junction to each C13 connector, so measure your rack spacing to confirm reach.

How can I verify the cord is delivering full rated current after I plug it in?

Check that the C20 inlet seats firmly in your PDU and both C13 outlets lock onto the server inlets; the UL-listed 12 AWG main cable and 14 AWG split legs are rated for 20 A at 250 V, so stable operation under load confirms correct function.

Does the package include any mounting hardware or do I need to buy cable ties separately?

Only the Y-splitter cord itself is included — one C20 male plug splitting to two C13 female connectors — so any cable-management accessories such as ties or Velcro straps must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.