We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter power cord with C20 male plug branching to two C13 female connectors, 1ft length

TeKit

TeKit C20 to Dual C13 Y-Splitter Power Cord 12AWG 14AWG 20A 15A 250V 1ft Black

SKU CH-AE01-CWTZ1

A 1 ft heavy-duty Y-splitter power cord with a C20 plug feeding two C13 sockets at 20 A and 250 V

  • TypeCable Splitters
  • ColorBlack
  • Length1 Foot
  • Connector Number3
  • Connector DetailC20 to dual C13 Splitter cord
  • Terminal GenderMale to Female

Size 6ft

  • C20 inlet powers two devices from one source
  • Heavy-duty 12AWG main wire ensures reliable transmission
  • 14AWG splitter branches deliver 15A at 250V
  • UL-listed safety meets data-center requirements
  • 1ft length keeps rack cabling tidy and organised

Splitter cord for server racks

This Y-splitter power cord connects a single C20 inlet to two C13 outlets, letting one PDU or UPS feed two rack devices. It is built for data-centre and server-room installations where outlet density is limited. The 1-foot length keeps cable runs short inside crowded cabinets.

Heavy-duty 12AWG and 14AWG wiring

The main 12AWG cable uses 3.31 mm² conductors rated for 20 A at 250 V, while each 14AWG split leg uses 2.08 mm² conductors rated for 15 A. UL-listed construction and secure-fitting IEC connectors resist vibration and accidental disconnection in rack environments. Black SJT jacket suits professional aesthetics.

20 A combined capacity from one C20 source

The splitter delivers up to 20 A total across both C13 branches, so the two connected devices must not draw more than 20 A together. Buyers needing higher per-outlet current or more than two C13 connections from one feed should choose a different power distribution unit.

Highlights

  • C20 inlet powers two devices from one source
  • Heavy-duty 12AWG main wire ensures reliable transmission
  • 14AWG splitter branches deliver 15A at 250V
  • UL-listed safety meets data-center requirements
  • 1ft length keeps rack cabling tidy and organised

Specifications

BrandTEKIT
TypeCable Splitters
ColorBlack
Length1 Foot
Connector Number3
Connector DetailC20 to dual C13 Splitter cord
Terminal GenderMale to Female
SpecificationsC20 to Dual C13 Splitter Power Cord,Toptekits Heavy Duty C20 Male to 2X C13 Female Y Splitter Cable Power Cord, 20A, 14 AWG
FeaturesC20 to Dual C13 Splitter Power Cord,Toptekits Heavy Duty C20 Male to 2X C13 Female Y Splitter Cable Power Cord, 20A, 14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What current does the C20-to-dual-C13 splitter actually support at 250 V?

The main 12 AWG leg is rated for 20 A and each 14 AWG branch for 15 A, so the splitter delivers up to 15 A per C13 outlet at 250 V.

How much rack depth does the 1 ft Y-splitter need for the C20 inlet and two C13 outlets?

The overall length is 1 ft; the C20-to-split section and each split-to-C13 leg are both 3 ft, so allow at least 3 ft from the PDU to the Y-junction plus 3 ft to each device.

Which wire gauge do I strip and terminate if I must shorten the 12 AWG main lead?

Only the 12 AWG (3.31 mm²) main conductors are spliced before the Y-junction; the 14 AWG (2.08 mm²) branch wires stay factory-terminated at the C13 connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.