We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black heavy-duty power extension cord with C20 male to C19 female connectors, 1.5m length

TeKit

TeKit C20 to C19 power extension cord 1.5m 14AWG 20A

SKU CH-D13D-MDQ65

Heavy-duty C20-to-C19 extension cord with 14AWG conductors, 20A rating and 1.5m length for server and PDU power links

  • TypeTekit Heavy-Duty Computer Power Extension Cord for Servers a
  • ColorBLACK
  • Length5 ft.
  • Connector Detailc20 to c19
  • FeaturesTekit Heavy-Duty Computer Power Extension Cord for Servers a
  • C20 to C19 connectors extend PDU-to-server power links
  • 5 m length gives flexible rack positioning
  • 14 AWG SJT cable handles 20 A continuous load
  • UL listed for verified safety in professional use
  • Rated 110–250 V for worldwide voltage compatibility

Reliable C20 to C19 server power extension

This TeKit cord extends the reach between a C20 inlet on a PDU or UPS and a C19 outlet on a server or high-power network device. It is built for professional IT environments where consistent energy delivery to critical hardware is required. The 1.5 metre length suits standard rack spacing without excess slack.

UL listed 12AWG SJT construction for heavy loads

The cable uses SJT 3x12AWG conductors rated for up to 20A at 110-250V, providing a sturdy link that resists overheating under continuous demand. A moulded C20 male plug and C19 female connector ensure a secure, vibration-resistant fit in dense rack installations. The black jacket aids visual cable management in dark cabinets.

Passive design runs silent with no added heat

As a passive copper assembly, the cord adds no fan noise or active thermal load to the rack. Its 12AWG gauge keeps resistive losses low across the 1.5 metre run, so connected equipment receives the full rated voltage. The UL listing confirms compliance with recognised safety standards for continuous operation.

Highlights

  • C20 to C19 connectors extend PDU-to-server power links
  • 5 m length gives flexible rack positioning
  • 14 AWG SJT cable handles 20 A continuous load
  • UL listed for verified safety in professional use
  • Rated 110–250 V for worldwide voltage compatibility

Specifications

BrandTEKIT
Model1.5m
TypeTekit Heavy-Duty Computer Power Extension Cord for Servers and Computers IEC-320-C19 to IEC-320-C20,C20 to C19 Extension Cable 110-250V,16A (1.8m/6ft)
ColorBLACK
Length5 ft.
Connector Detailc20 to c19
FeaturesTekit Heavy-Duty Computer Power Extension Cord for Servers and Computers IEC-320-C19 to IEC-320-C20,C20 to C19 Extension Cable 110-250V,16A (1.8m/6ft)

Questions about this item

What does the IEC 320 C19 to C20 connection support in practice?

The cord carries up to 20 A at 110–250 V, matching the 14 AWG SJT rating for server and PDU links.

What clearance does the 1.5 m length and C19/C20 bodies need in a rack?

Allow roughly 1.5 metres of cable run plus the connector hood depth; the moulded plugs add about 50 mm each beyond the pins.

How do I seat the C20 plug into a PDU without leaving a gap?

Align the keyway, push straight in until the latch clicks, then tug gently to confirm the lock is fully engaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.