TeKit C14 to C15 & 5-15R Y Splitter Power Adapter

IEC C14 to C15 and 5-15R Splitter

This adapter converts a single IEC C14 inlet into two outputs: an IEC C15 connector and a 5-15R US socket. It suits rack equipment that needs a high-temperature C15 lead alongside a standard North American plug. Builders who require more than two outlets or a different regional socket cannot use this unit.

Rated for 10A to 16A at 110V to 250V

The moulded PVC housing carries a 94-V0 flammability rating and supports up to 2500W total load. Under sustained draw the splitter remains within its thermal limits provided the combined current does not exceed the rated range. Installations that demand continuous loads above 16A or voltages outside the 110V to 250V window need a different power distribution solution.

Plugs directly into a C14 inlet

The Y-cable layout keeps both connectors close to the source, so cable routing stays compact in tight rack spaces. The 30g weight adds negligible strain on the panel mount. Users who need longer reach between the two outputs or a locking C14 retention clip will find this fixed-length splitter unsuitable.