We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.5 m IEC C14 to C13 power cord with 90° angled plugs at both ends

TeKit

TeKit C14 to C13 90° extension cord 1.5m

SKU CH-HETP-1DRCE

Extends C13 power connections by 1.5 m with 90° C14 and C13 plugs for tight spaces, rated 10 A 250 V

  • TypeExtension Cable
  • ColorBlack
  • Length5ft/1.5m
  • Connector Number2
  • Connector Detail90 degree C14 to 90 degree C13
  • Terminal GenderMale to Female

Length 1.5m

  • 90° connectors fit tight server racks and PDU strips
  • 5 m extension reaches ceiling projectors and wall displays
  • 10 A 250 V rating supports monitors, printers and speakers
  • IEC 320 C14 to C13 links PC directly to UPS
  • Black cable keeps cabinet wiring neat and identifiable

Space-saving power extension

This 1.5 m cord adds reach between a C14 inlet and a C13 outlet while both 90-degree angled connectors keep the cable close to the chassis. It is built for server racks, PDUs and UPS units where rear clearance is tight. The 10 A 250 V rating matches standard IEC 320 equipment. One cord is supplied in the package.

Installers with cramped rear access

The right-angle ends let the cable run parallel to the device instead of projecting straight out, so it suits cabinets where a straight plug would hit a door or another unit. Buyers who need a longer run, a straight connector, or a different conductor gauge should look at other options.

90-degree C14 to C13 geometry

The defining spec is the pair of 90-degree IEC 320 connectors — C14 male on one end, C13 female on the other — which determines whether the cord fits the physical space and port orientation of the target hardware.

Highlights

  • 90° connectors fit tight server racks and PDU strips
  • 5 m extension reaches ceiling projectors and wall displays
  • 10 A 250 V rating supports monitors, printers and speakers
  • IEC 320 C14 to C13 links PC directly to UPS
  • Black cable keeps cabinet wiring neat and identifiable

Specifications

BrandTekit
TypeExtension Cable
ColorBlack
Length5ft/1.5m
Connector Number2
Connector Detail90 degree C14 to 90 degree C13
Terminal GenderMale to Female
Specifications90 Degree Angle C14 to 90 Degree Angle C13 Power Plug Converter Adapter Cable Cord
Features90 Degree Angle C14 to 90 Degree Angle C13 Power Plug Converter Adapter Cable Cord

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I route the 1.5 m C14-to-C13 cord into a tight rack without bending the cable sharply?

Both ends are 90-degree angled connectors; insert the C14 male into the device inlet and the C13 female into the PDU or UPS outlet so the cable runs parallel to the chassis, avoiding a sharp bend at the plug.

Will the cord itself need replacement, or only the connectors, after years of rack moves?

The cord is a fixed assembly rated 10 A 250 V; if the jacket shows cracking or the pins become loose, replace the whole 1.5 m cable rather than individual connectors.

At what load does the 10 A 250 V rating become the limiting factor during continuous server operation?

The 10 A limit is reached first; sustained draw above 10 A will overheat the conductors before the 250 V insulation rating becomes relevant.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.