We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black adapter cables with 5-pin motherboard headers and USB 2.0 Type A female ports

TeKit

TeKit 5 Pin Motherboard Header to USB 2.0 Female Adapter Cable 2 Pack 20cm

SKU CH-XF68-97DDC

Two 20 cm cables convert a 5-pin motherboard header to a USB 2.0 Type A female port

  • TypeCable Connectors
  • ColorBlack
  • Length0.6ft/0.2m
  • Cable Length7.87 in. (20cm)
  • SpecificationsUSB 2.0 Type A Female to Dupont 5 Pin Female Header Data Mot
  • Connector A5 Pin Motherboard Female

Cable Length 0.5 ft.

  • Converts internal USB header to external USB 2.0 port
  • 20 cm cable length fits tight case routing
  • Supports USB 1.1 and USB 2.0 speeds
  • 54 mm pitch matches standard motherboard headers
  • Pack includes two adapter cables for multiple connections

Internal USB 2.0 Header Adapter

This two-pack adapter cable converts a motherboard 5-pin header into a standard USB 2.0 Type-A female port. Each cable measures 20 cm (7.87 in) and uses a 2.54 mm pitch Dupont connector. The set adds external USB access without occupying a rear I/O slot.

Builders needing front-panel USB ports

Suitable for cases with front USB cut-outs, test benches or custom enclosures that lack native headers. Not intended for builders who require USB 3.0 or 3.1 speeds, nor for anyone needing an internal header that carries additional power pins.

5-pin header to USB 2.0 Type-A conversion

The single deciding specification is the 5-pin motherboard header to USB 2.0 Type-A female mapping. If the board provides a standard 5-pin USB header with 2.54 mm spacing, the adapter fits; proprietary or keyed headers will not mate.

Highlights

  • Converts internal USB header to external USB 2.0 port
  • 20 cm cable length fits tight case routing
  • Supports USB 1.1 and USB 2.0 speeds
  • 54 mm pitch matches standard motherboard headers
  • Pack includes two adapter cables for multiple connections

Specifications

BrandTekit
TypeCable Connectors
ColorBlack
Length0.6ft/0.2m
Cable Length7.87 in. (20cm)
SpecificationsUSB 2.0 Type A Female to Dupont 5 Pin Female Header Data Motherboard Adapter Cable
Connector A5 Pin Motherboard Female
Connector BUSB 2.0 A Female
Connector Number2
Connector DetailUSB 2.0 Type A Female to Dupont 5 Pin Female Header Data Motherboard Adapter Cable
Terminal GenderMale to Female
FeaturesUSB 2.0 Type A Female to Dupont 5 Pin Female Header Data Motherboard Adapter Cable

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 20 cm cable add noticeable heat or electrical noise when a USB device runs all day?

The adapter is a passive 20 cm cable with no active electronics, so it does not generate heat or electrical noise during continuous use.

What must already be present on the motherboard for the 5-pin female header to connect?

A standard 5-pin USB header with 2.54 mm pin spacing is required on the motherboard for the Dupont connector to plug in.

Will a USB 1.1 peripheral work at full speed when plugged into this adapter?

Yes, the cable supports both USB 1.1 and USB 2.0 signalling, so a USB 1.1 device will operate at its rated speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.