We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TeKit

TeKit 11271 Cat7 network ethernet cable 16.4ft 600MHz 10Gbps STP black

SKU CH-YN9S-PG18P

A 16.4 ft Cat7 shielded patch cable rated for 10 Gbps at 600 MHz with gold-plated RJ45 connectors

  • TypeEthernet Cable Cat7 Networking Cord Patch Cable RJ45 10 Giga
  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length16.4 ft.
  • ColorBlack
  • 10Gbps data transfer for ultra-fast networking
  • 600MHz bandwidth supports maximum LAN/WAN speeds
  • STP shielding with four twisted pairs blocks crosstalk and noise
  • Gold-plated RJ45 connectors resist corrosion for reliable contact
  • 4ft length reaches distant devices without signal loss

TeKit 11271 Cat7 16.4 ft Patch Cable

This TeKit Cat7 Ethernet cable runs 16.4 feet with RJ45 connectors on each end. It is built for anyone who needs a shielded twisted-pair link between a router, modem, PC, Mac, laptop or game console. The 26 AWG conductors and gold-plated plugs support 10 Gbps data rates over the full length.

Practical limits of Cat7 600 MHz shielding

The cable is rated for 600 MHz bandwidth and 10 Gbps throughput up to 100 metres. Its four shielded twisted pairs and an overall foil screen suppress crosstalk and external noise better than unshielded alternatives. Performance will still depend on the switch, router or network card at each end supporting the same speed tier.

Check your ports and routing before ordering

Verify that both devices have standard RJ45 jacks and that the 6.3 mm outside diameter can pass through your cable management paths. The clip protector helps prevent snag damage during installation. Buyers who need longer runs, outdoor-rated jackets or non-RJ45 terminations should look elsewhere.

Highlights

  • 10Gbps data transfer for ultra-fast networking
  • 600MHz bandwidth supports maximum LAN/WAN speeds
  • STP shielding with four twisted pairs blocks crosstalk and noise
  • Gold-plated RJ45 connectors resist corrosion for reliable contact
  • 4ft length reaches distant devices without signal loss

Specifications

BrandTekit
Model11271
TypeEthernet Cable Cat7 Networking Cord Patch Cable RJ45 10 Gigabit 600Mhz Lan Wire Cable STP
Cat7
Connector ARJ45
Connector BRJ45
Length16.4 ft.
ColorBlack
ShieldedYes
Sports TeamAlabama Crimson Tide
Sports LeagueCloud9
FeaturesEthernet Cable Cat7 Networking Cord Patch Cable RJ45 10 Gigabit 600Mhz Lan Wire Cable

Questions about this item

Should I choose the 16.4 ft length or look for a different length for my setup?

The cable is supplied at 16.4 ft (5 m). Measure the distance between your router or switch and the device, then add a little slack for routing; if that total exceeds 16.4 ft you will need a longer run.

What does the 10 Gbps rating mean when the cable is plugged into my router and PC?

It indicates the cable can carry up to 10 Gbps over the full 100 m maximum channel length, so at 16.4 ft you will see the full 10 Gbps provided both ends have 10 GbE ports.

The cable is Cat7 with 600 MHz bandwidth — what does that cap in practice?

Cat7 specifies 600 MHz bandwidth, which supports 10 Gbps Ethernet up to 100 m; the practical limit is the 10 GbE port speed on your router, switch or network card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.