TeKit
TeKit 10673 VGA cable 3.3 ft male to male gold ferrite
A 3.3 ft VGA male-to-male cable with gold-plated connectors, dual ferrite cores and foil-and-braid shielding for clear video up to 1920 x 1200
- TypeVGA Extension cable,VGA/SVGA HD15 Male to Male Video Coaxial
- ColorBlack
- Length< 6 ft.
- Connector Number2
- Connector DetailVGA Extension cable,VGA/SVGA HD15 Male to Male Video Coaxial
- Terminal GenderMale to Male
- Clear 1080p and 1920x1200 video on monitors and projectors
- Gold-plated 15-pin connectors resist corrosion for reliable contact
- Dual ferrite cores and foil-braid shielding block EMI and RFI noise
- 28AWG pure copper conductors preserve signal quality over 3.3 ft
- Male-to-male HD15 design links PC or laptop directly to display
TeKit 10673 VGA extension cable
The TeKit 10673 is a 3.3 ft VGA extension cable with HD15 male-to-male connectors. It links a computer or laptop to a monitor, projector or HDTV that uses a 15-pin VGA port. Gold-plated contacts and 28AWG oxygen-free copper conductors carry the analogue video signal. The cable is built for classrooms, meeting rooms and home offices where a short reach is sufficient.
VGA analogue bandwidth limits
The VGA interface carries analogue RGBHV signals and does not transport audio or digital copy-protection data. Maximum usable resolution depends on the source and display hardware rather than the cable alone. Very long runs can degrade high-frequency detail, but at 3.3 ft the signal loss is minimal. Users needing 4K or HDR output must use a digital interface such as HDMI or DisplayPort instead.
Shielded construction with dual ferrite cores
Foil and braid shielding plus two integrated ferrite cores suppress electromagnetic and radio-frequency interference. The gold-plated DE-15 plugs resist oxidation and maintain low contact resistance over repeated insertions. A 3.3 ft length keeps desk clutter low while reaching nearby displays or projectors. The cable is not suited for in-wall installation or runs that exceed the short reach provided.
Highlights
- Clear 1080p and 1920x1200 video on monitors and projectors
- Gold-plated 15-pin connectors resist corrosion for reliable contact
- Dual ferrite cores and foil-braid shielding block EMI and RFI noise
- 28AWG pure copper conductors preserve signal quality over 3.3 ft
- Male-to-male HD15 design links PC or laptop directly to display
Specifications
| Brand | Tekit |
|---|---|
| Model | 10673 |
| Type | VGA Extension cable,VGA/SVGA HD15 Male to Male Video Coaxial Monitor Cable with Ferrite Cores Gold Plated |
| Color | Black |
| Length | < 6 ft. |
| Connector Number | 2 |
| Connector Detail | VGA Extension cable,VGA/SVGA HD15 Male to Male Video Coaxial Monitor Cable with Ferrite Cores Gold Plated |
| Terminal Gender | Male to Male |
| Specifications | VGA Extension cable,VGA/SVGA HD15 Male to Male Video Coaxial Monitor Cable with Ferrite Cores Gold Plated |
| Connect From | 1 x VGA |
| Connect To | 1 x VGA |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | VGA Extension cable, with Ferrite Cores Gold Plated |
| Cable Length | 3.3 ft. |
Questions about this item
Should I choose the 3.3 ft length or look for a longer VGA cable?
The 3.3 ft TeKit 10673 suits short desk runs between a PC and monitor; if your projector or display sits further away, select a longer VGA cable instead.
Will this cable actually carry a 1920x1200 signal on my monitor?
Yes, the cable is specified for resolutions up to 1920x1200 (WUXGA) and 1080p, so it will transmit those modes over its 3.3 ft run.
Does the HD15 male-to-male connector limit the refresh rate or resolution I can use?
The 15-pin HD15 interface carries analog VGA signals; the cable supports up to 1920x1200, and any further limits come from your graphics card or display, not the connector itself.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



