We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PCB adapter converting 1.8 inch Micro SATA to 2.5 inch SATA

TeKit

TeKit 1.8" Micro SATA to 2.5" SATA adapter Blue

SKU CH-JBPT-1ZANP

Converts a 1.8″ micro SATA drive to a 2.5″ SATA form factor for laptop installation

  • ColorBlue
  • Changer Type1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop
  • Specifications1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop
  • Features1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop
  • Converts 1.8″ Micro SATA drives to standard 2.5″ SATA bays
  • Compact PCB design fits inside 2.5″ drive slots
  • Supports Toshiba MK1216GSG, MK1235GSL, MK1629GSG and all 1.8″ Micro SATA SSDs or HDDs
  • 100 % brand-new condition ensures reliable operation
  • Simple plug-and-play installation with no extra drivers required

1.8″ Micro SATA adapter for laptop drives

This blue PCB adapter converts a 1.8″ Micro SATA SSD or HDD to a standard 2.5″ SATA form factor. It is designed for owners of 1.8″ micro SATA drives who need to install them in a laptop or enclosure that only accepts 2.5″ SATA devices. The board fits Toshiba MK1216GSG, MK1235GSL, MK1629GSG and any other 1.8″ micro SATA drive.

Passive signal conversion under sustained load

The adapter contains no active electronics, so it simply passes the native SATA signals from the 1.8″ drive to the 2.5″ connector. Because there is no controller or buffer, throughput and latency remain identical to a direct drive connection. Heat is limited to the drive itself; the small PCB adds no thermal load during extended read or write sessions.

Straightforward drop-in installation

Align the 1.8″ drive with the Micro SATA header on the blue board, press it firmly into place, then insert the combined assembly into a 2.5″ SATA bay or caddy. The only common issue is a loose fit if the drive is not fully seated on the Micro SATA pins; double-check alignment before securing the assembly in the laptop.

Highlights

  • Converts 1.8″ Micro SATA drives to standard 2.5″ SATA bays
  • Compact PCB design fits inside 2.5″ drive slots
  • Supports Toshiba MK1216GSG, MK1235GSL, MK1629GSG and all 1.8″ Micro SATA SSDs or HDDs
  • 100 % brand-new condition ensures reliable operation
  • Simple plug-and-play installation with no extra drivers required

Specifications

BrandTekit
ColorBlue
Changer Type1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop Notebook Adapter PCB
Specifications1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop Notebook Adapter PCB
Features1.8" Micro SATA SSD HDD Hard Disk Drive to 2.5" SATA Laptop Notebook Adapter PCB

Questions about this item

Does the 1.8" Micro SATA to 2.5" SATA adapter generate any noise or heat when running all day?

The passive PCB adapter has no moving parts and draws negligible power, so it adds no audible noise or measurable heat during continuous operation.

What else must I already own for this 1.8" Micro SATA adapter to work?

You need a 1.8" Micro SATA drive such as a Toshiba MK1216GSG, MK1235GSL or MK1629GSG, plus a system with a standard 2.5" SATA bay and cable.

Will this 1.8" Micro SATA adapter work alongside an older 2.5" SATA drive I plan to keep?

Yes, the adapter simply converts the 1.8" Micro SATA interface to a 2.5" SATA form factor, so both drives can coexist on the same SATA controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.