We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Taymac

Taymac LT233S Floodlight Lampholder Kit 150W

SKU CH-WPVN-2RCHM

Surface-mount kit holds two 150 W incandescent PAR38 lamps on a gray UL-listed base

  • Two adjustable heads direct light where needed
  • 150 W maximum per socket for bright illumination
  • Standard E26 bases accept common PAR38 lamps
  • Surface-mount design installs on walls or eaves
  • UL listed and rated for 120 V AC operation

Two-head floodlight kit

The Taymac LT233S supplies a pair of surface-mount lampholders rated for 150 W each at 120 V AC. Gray housings accept standard E26 medium-base lamps up to PAR38 size. UL listing confirms the assembly meets recognised safety requirements for outdoor installation.

E26 medium-base socket

Each head uses a standard E26 socket so any compatible incandescent or LED PAR38 lamp can be fitted. No lamp is included in the kit, allowing the installer to choose colour temperature and beam spread. The 150 W per socket limit must not be exceeded.

Continuous 150 W rating

The housings are designed to dissipate heat from a full 150 W load per head during extended operation. Surface mounting on a suitable junction box provides the required thermal path. UL certification covers sustained use, not only brief cycles.

Highlights

  • Two adjustable heads direct light where needed
  • 150 W maximum per socket for bright illumination
  • Standard E26 bases accept common PAR38 lamps
  • Surface-mount design installs on walls or eaves
  • UL listed and rated for 120 V AC operation

Specifications

BrandTAYMAC

Questions about this item

What does the 150 W rating mean for actual light output?

Each socket is rated for a maximum 150 W incandescent lamp, so the fixture can run up to that wattage per head for broad area lighting.

How does the 120 V AC voltage limit what lamps I can use?

The kit is designed for standard 120 V household circuits, so any PAR38 lamp rated for 120 V and up to 150 W will operate correctly.

What mounting surface and hardware does the gray housing need?

The surface-mount base attaches directly to a flat wall or ceiling using the included mounting hardware for a secure installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.