We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel sliding rack shelf with ventilation slots and mounting hardware

TAURKENAM

TAURKENAM Sliding Fixed Rack Shelf 1U 19" 4-Post Adjustable 24-32" 80LB

SKU CH-M0MF-YPK34

A sliding 19-inch rack shelf adjusts from 24 to 32 inches deep and supports up to 80 lb of equipment

  • TypeSee Description
  • Fits 19" standard racks and holds tower units or monitors
  • Cold-rolled steel with powder coating resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Supports up to 80 lb of equipment on a lightweight frame
  • M6 screws and cage nuts included for quick installation

1U Sliding Rack Shelf for 19-inch Cabinets

This 1U sliding shelf mounts in standard 19-inch racks and accepts tower units, monitors and similar equipment. Cold-rolled steel with a powder-coated finish resists rust and corrosion. The adjustable depth spans 24 to 32 inches to fit four-post frames. M6 screws and cage nuts are supplied for installation.

Sustained Load Behaviour with 80LB Capacity

The shelf is rated for a continuous 80LB load across its vented surface. Slotted venting maintains airflow around equipment during extended operation. Powder coating protects the steel from corrosion over long deployments. The fixed sliding mechanism keeps the shelf stable when fully extended under weight.

Pre-Installation Checks for Four-Post Racks

Verify the rack provides 19-inch EIA spacing and four mounting posts. Measure the post-to-post depth to confirm it falls within the 24 to 32-inch adjustment range. Ensure the combined equipment weight does not exceed the 80LB limit. Check that M6 hardware matches the rack's thread pattern.

Highlights

  • Fits 19" standard racks and holds tower units or monitors
  • Cold-rolled steel with powder coating resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Supports up to 80 lb of equipment on a lightweight frame
  • M6 screws and cage nuts included for quick installation

Specifications

TypeSee Description

Questions about this item

How much heat builds up on the shelf when equipment runs continuously?

The slotted venting pattern maximises airflow through the shelf, helping to dissipate heat from equipment mounted on the cold-rolled steel surface.

Which mounting hardware is already in the box for a standard 19-inch four-post rack?

M6 screws and cage nuts are included, so the shelf bolts directly to 19-inch EIA rails with a 24-to-32-inch depth range.

Will this shelf support a legacy tower server that weighs close to the 80-pound limit?

The shelf is rated for 80LB capacity and fits 19-inch standard equipment, so a tower unit within that weight can sit securely on the powder-coated steel.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.