We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of silver metal sliding rails with ball-bearing tracks and mounting brackets

TAURKENAM

TAURKENAM RMS05-22 Sliding Rail Kit for RM44 / RM51 Chassis

SKU CH-KTZQ-VDG4V

Tool-less ball-bearing rail kit mounts 440 mm wide 3U or 4U chassis in racks with 595–936 mm hole spacing, rated for 35 kg load

  • Tool-less ball-bearing rails speed up installation
  • Adjustable depth from 595 mm to 936 mm fits most cabinets
  • 35 kg load rating supports heavy 3U or 4U servers
  • Compatible with RM44, RM46, RM47, RM51 and RM52 chassis
  • Includes left and right rails for immediate mounting

Sliding Rail Kit for RM44 and RM51 Chassis

This tool-less ball bearing rail kit fits 440mm wide 3U or 4U server chassis. It includes left and right rails for mounting into standard rack cabinets. The kit is designed for SilverStone RM44, RM46, RM47, RM51 and RM52 models. Installation requires no tools for quick deployment.

Adjustable Depth and Load Capacity

The rails adjust to fit rack cabinets with mounting hole distances between 23.5 and 36.5 inches (595 to 936mm). This range accommodates various cabinet depths without modification. Maximum loading is rated at 77.16 pounds (35kg) for supported equipment. Ball bearing slides provide smooth extension for maintenance access.

Verify Chassis Width and Cabinet Hole Spacing

Confirm your chassis is exactly 440mm wide and either 3U or 4U height before ordering. Measure the front-to-rear mounting hole distance on your rack cabinet to ensure it falls within the 595 to 936mm range. This kit will not fit narrower chassis or cabinets outside the specified depth adjustment. Check compatibility with RM44, RM46, RM47, RM51 or RM52 models only.

Highlights

  • Tool-less ball-bearing rails speed up installation
  • Adjustable depth from 595 mm to 936 mm fits most cabinets
  • 35 kg load rating supports heavy 3U or 4U servers
  • Compatible with RM44, RM46, RM47, RM51 and RM52 chassis
  • Includes left and right rails for immediate mounting

Specifications

No published specifications for this item yet.

Questions about this item

Do the ball-bearing rails on the RMS05-22 need periodic lubrication or replacement?

The kit uses sealed ball-bearing slides that are designed for maintenance-free operation; no lubrication schedule or rail replacement interval is specified.

What stops the rails from extending further when a 35 kg chassis is fully loaded?

The maximum load rating of 77.16 pounds (35 kg) is the structural limit; exceeding it risks permanent deformation of the rail members.

How much heat or noise do the sliding rails add when the chassis runs continuously?

The rails are passive metal components with ball-bearing races; they generate no measurable heat and no audible noise during normal operation.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.