We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thick orange 15-foot cord with twist-lock plug and bare wire ends

TAURKENAM

TAURKENAM L6-30P power adapter 30A 250V 15ft

SKU CH-19R6-RFQ45 MPN L6-30P

A 15-foot locking cord with a NEMA L6-30P plug rated for 30 amps at 250 volts, ready for hard-wire installation

  • NEMA L6-30P locking plug prevents accidental disconnection
  • 15-foot cord length provides flexible equipment placement
  • 30-amp 250-volt rating supports high-power devices
  • 10/3 SJTW cable construction handles demanding environments
  • Bare wire ends allow direct hard-wired installation

Industrial Power Connection

This 15-foot locking cord carries a NEMA L6-30P plug rated for 30 amps at 250 volts. The SJTW 10/3 cable terminates in bare wires for direct hard-wiring into equipment or junction boxes. No assembly is required before installation.

Fixed-Wiring Installers

It suits electricians and technicians who need a durable, locking supply lead for permanent connection to machinery, generators or distribution panels. It is not for users who need a cord that plugs into a standard wall receptacle or a different locking configuration.

30 A 250 V Locking Rating

The NEMA L6-30P plug and 10 AWG three-conductor cable define the safe current and voltage limit for this cord. Matching that rating to the load and the mating receptacle is the single specification that decides whether this is the right part.

Highlights

  • NEMA L6-30P locking plug prevents accidental disconnection
  • 15-foot cord length provides flexible equipment placement
  • 30-amp 250-volt rating supports high-power devices
  • 10/3 SJTW cable construction handles demanding environments
  • Bare wire ends allow direct hard-wired installation

Specifications

No published specifications for this item yet.

Questions about this item

How much heat will the NEMA L6-30P locking plug generate during continuous 30-amp operation?

The cord uses 10-gauge SJTW conductors rated for 30 amps at 250 volts, so heat stays within the cable's design limits for sustained loads.

What existing wiring must be in place for the bare-wire end to connect safely?

The unterminated end requires a hard-wire junction box or terminal strip on a dedicated 30-amp 250-volt circuit with proper grounding.

Will the 15-foot length reach a wall-mounted L6-30R receptacle from floor-level equipment racks?

At 15 feet the cord spans typical rack-to-wall distances, and the locking plug secures firmly in the NEMA L6-30R outlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.