We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM Junction Box Outdoor Waterproof IP68 2Way M20 2PCS

SKU CH-4H4K-SV0Z9

IP68 waterproof junction box with two M20 quick connectors for up to four-core cables, PA66 V-0 rated from -40 °C to 105 °C, submersible to 3.5 m

  • IP68 rating protects cables underwater to 3.5 m
  • PA66 housing withstands -40 °C to 105 °C with V-0 flame retardancy
  • Two quick connectors accept up to 4-core cables for flexible repairs
  • Screwdriver-only install seals terminals inside a wall- or ground-mountable box
  • UL, TUV, SAA, CE and RoHS certified for safe outdoor lighting and signage

Two-Way M20 Junction Box

This TAURKENAM junction box is an IP68-rated electrical enclosure designed for outdoor and underground cable connections. It ships as a pair of units built from PA66 material with a V-0 flame-retardant rating. The housing operates across a wide temperature range from -40°C to 105°C and holds UL, TUV, SAA, CE and ROSH certifications.

Installers needing IP68 cable joins

The kit suits electricians and DIYers joining or repairing power cables up to four cores in gardens, street lighting, tunnel lights or submerged installations down to 3.5 m. It is not intended for buyers who require connector types other than the supplied M20 quick-connect terminals or who need a higher core count than four.

IP68 rating to 3.5 m depth

The single specification that decides fit is the IP68 waterproof rating, which guarantees protection against dust and continuous immersion in water up to 3.5 m. This makes the box suitable for buried or permanently wet locations where lesser ratings would fail.

Highlights

  • IP68 rating protects cables underwater to 3.5 m
  • PA66 housing withstands -40 °C to 105 °C with V-0 flame retardancy
  • Two quick connectors accept up to 4-core cables for flexible repairs
  • Screwdriver-only install seals terminals inside a wall- or ground-mountable box
  • UL, TUV, SAA, CE and RoHS certified for safe outdoor lighting and signage

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the TAURKENAM junction box and which step is most often missed?

Strip cables to the correct length, insert each core into the quick connector until it clicks, then tighten the M20 clamping nut until the rubber ring compresses evenly — the step most often missed is fully tightening that nut, which breaks the IP68 seal.

What maintenance will the PA66 junction box need over time?

Inspect the rubber ring and clamping nut annually for UV cracking or debris; replace the seal if it hardens, and re-torque the M20 nut to maintain the IP68 rating at depths down to 3.5 m.

What is the first limit reached when the box runs continuously at high temperature?

The PA66 housing is rated to 105 °C; sustained operation above that temperature will degrade the V-0 flame-retardant material before the IP68 seal or the 4-core connectors reach their limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.