We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black hanging lantern extension cords with E26 sockets and inline switches

TAURKENAM

TAURKENAM Hanging Lantern Extension Cord 20 Feet Black 2-Pack

SKU CH-4JH9-6ADX6

A 20-foot E26/E27 pendant light socket with an inline on-off switch near the polarized plug, supplied as a two-pack with ceiling hooks and anchors

  • Add overhead light without rewiring using the inline on-off switch
  • Install in minutes with included ceiling hooks and drywall anchors
  • Control the bulb from floor level with the switch near the polarized plug
  • Use any E26 bulb up to 100 W at 250 V on the standard socket
  • Two 20-foot cords light separate areas such as garage, porch or closet

Hanging Lantern Extension Cord 20 Feet

The TAURKENAM hanging lantern extension cord adds overhead lighting wherever a fixed fixture is missing. Each cord uses a standard E26 socket that accepts any E26 bulb. The inline toggle switch sits close to the polarized plug for easy reach. Two cords are included in the pack.

Thermals Noise Power Draw

The cord is rated for a maximum of 100 watts at a working voltage of 0 to 250 volts. No active cooling or fan is present so operation is silent. Power draw depends entirely on the bulb installed. The two-prong polarized plug connects to standard household outlets.

Bundled Installation Hardware

Sturdy ceiling hooks, drywall anchors, cord hooks and usage instructions are supplied for mounting. The 20-foot cord length provides flexibility for bedrooms, garages, porches and similar spaces. The switch-to-plug wire measures approximately 1.5 metres. No software or smart-home integration is included.

Highlights

  • Add overhead light without rewiring using the inline on-off switch
  • Install in minutes with included ceiling hooks and drywall anchors
  • Control the bulb from floor level with the switch near the polarized plug
  • Use any E26 bulb up to 100 W at 250 V on the standard socket
  • Two 20-foot cords light separate areas such as garage, porch or closet

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the hanging lantern extension cord and what step is often missed?

Mount the supplied ceiling hooks using the included drywall anchors, then attach the cord hooks to guide the 20-foot cable; the step often missed is securing the cord hooks so the weight rests on the ceiling hardware, not the socket.

What maintenance or replacement will the E26 socket need over time?

The standard E26 base accepts any E26 bulb, so only the bulb itself requires periodic replacement; the cord and inline switch are rated for 100 W at up to 250 V and have no user-serviceable parts.

What limit appears first during sustained use of the 20-foot cord?

The 100 W maximum power rating is the first limit reached under continuous load; exceeding it risks overheating the 1.5 m switch-to-plug section before any voltage-drop issue arises on the 20-foot run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.