We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic E26/E27 socket adapter with three grounded outlets and short extension cord, two-pack

TAURKENAM

TAURKENAM E26/E27 Light Socket Adapter 3 Outlet 10A 1250W 7 inch Cord Black 2 Pack

SKU CH-QS7D-7Y4S4

Converts an E26 or E27 bulb socket into three grounded AC outlets with a 7-inch cord, rated at 125 V, 10 A and 1250 W, and includes a built-in fuse for overload protection

  • Add three outlets to any E26 or E27 lamp holder
  • Accepts both two-prong and three-prong plugs without extra adapters
  • 7-inch cord lets you orient the adapter in any direction
  • Flame-retardant PVC housing resists heat and corrosion for long service
  • Rated 125 V AC, 10 A, 1250 W with built-in fuse for overload protection

E26/E27 Socket Adapter Two Pack

This two-pack converts standard E26 or E27 light sockets into three grounded AC outlets. It suits homeowners and DIYers who need temporary power in garages, basements, workshops or covered outdoor areas without installing new wiring.

Three Prong Outlets Plus Extension Cord

Each adapter provides three prong sockets that accept both two and three prong plugs, removing the need for separate grounding adapters. A 7 inch cord lets you orient the outlets away from the fixture, and an internal fuse interrupts power if the 10 amp rating is exceeded.

Check Socket Type And Load Before Use

Verify the existing fixture uses an E26 or E27 base and is rated for 125 volt AC supply. Ensure the combined draw of connected devices stays below 1250 watts and avoid sustained high-current loads that could trip the fuse.

Highlights

  • Add three outlets to any E26 or E27 lamp holder
  • Accepts both two-prong and three-prong plugs without extra adapters
  • 7-inch cord lets you orient the adapter in any direction
  • Flame-retardant PVC housing resists heat and corrosion for long service
  • Rated 125 V AC, 10 A, 1250 W with built-in fuse for overload protection

Specifications

No published specifications for this item yet.

Questions about this item

Does the built-in fuse need replacement after it trips, or does it reset automatically?

The adapter uses a one-time fuse that cuts power when current exceeds 10 A; once it blows the fuse must be replaced before the unit works again.

What is the maximum continuous load the three outlets can handle together?

The combined draw must stay at or below 10 A at 125 V AC, which equals 1250 W, or the fuse will open to prevent overheating.

How hot does the flame-retardant PVC housing get when the adapter runs at full 1250 W all day?

The housing is rated heat-resistant and erosion-resistant, but no specific surface-temperature figure is published for sustained maximum-load operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.