We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver handheld crimper with three-point jaws and ratchet mechanism

TAURKENAM

TAURKENAM B7946 3-Point Mini Wire Cable Crimper

SKU CH-8SYQ-GPN4H

A compact 3-point crimper for cables up to 4/0 AWG, operable by hand, ratchet, wrench, vise or 3/8 impact drill

  • Compact 3-point crimp reaches tight spaces
  • Handles up to 4/0 AWG cables for heavy wire
  • Works with 3/8 drive, 19mm wrench or vise
  • Impact-drill compatible for high-force crimping
  • Small handheld design fits confined work areas

TAURKENAM B7946 3-Point Mini Crimper

The TAURKENAM B7946 is a compact handheld crimping tool designed to create a three-point crimp on cables up to 4/0 AWG. Its small form factor allows operation in tight work areas where larger tools cannot fit. It is intended for electrical professionals and DIY users working on battery, heating, or general wiring projects.

Installation uses a ratchet mechanism

The movable crimping head ratchets down onto the fixed two-point base to form the three-point connection. The tool accepts a 3/8 inch drive extension or ratchet, a 19mm or 3/4 inch open-end wrench, or can be secured in a vise for bench work. A 3/8 inch impact battery drill may also drive it for heavy-duty wire, though excessive force can damage the mechanism.

Suited for professionals

This crimper suits tradespeople and home users who require a versatile, space-saving tool for large-gauge cable termination. It is not for buyers who need a hydraulic press for high-volume production, those requiring insulated terminal crimping dies, or users who prefer a full-cycle ratchet mechanism with automatic release.

Highlights

  • Compact 3-point crimp reaches tight spaces
  • Handles up to 4/0 AWG cables for heavy wire
  • Works with 3/8 drive, 19mm wrench or vise
  • Impact-drill compatible for high-force crimping
  • Small handheld design fits confined work areas

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 3-point crimp is solid on a 4/0 AWG cable after setup?

A complete crimp shows the movable head fully ratcheted down onto the two-point base with no visible gap; the connector should hold the cable firmly when tugged by hand.

What comes in the box and what must I supply separately?

The box contains the B7946 crimper only; you will need a 3/8 drive extension or ratchet, a 19 mm or 3/4 open-end wrench, a bench vise or a 3/8 impact drill to operate it.

Which version of the B7946 should I choose for heavy-duty wire work?

There is only the single B7946 model; its 3-point design works up to 4/0 AWG and accepts a 3/8 impact drill for the heaviest cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.