We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC-jacketed cable reel with three conductors and length markings

TAURKENAM

TAURKENAM 50ft 18AWG 3 Conductor LED Cable power adapter

SKU CH-SB53-5PY20

A 50 ft, 18 AWG three-conductor cable with 16-strand oxygen-free copper per channel, UL Class 2 rated for in-wall LED power runs

  • 50 ft reel simplifies long in-wall runs
  • 18 AWG three-conductor design carries low-voltage LED power
  • 16 stranded pure copper wires per channel reduce resistance
  • Oxygen-free copper conductors meet in-wall safety needs
  • UL certified NEC 725 Class 2 rating confirms code compliance

50ft 18AWG 3 Conductor LED Cable

This 50ft 18AWG 3 Conductor LED Cable is designed for low voltage in-wall installations. It suits installers running power to LED lighting systems where NEC 725 Class 2 rated wiring is required. The white PVC jacket and oxygen free copper conductors support permanent placement inside walls. Sequential 2ft length markings simplify measuring and cutting during installation.

White PVC Jacket and Oxygen Free Copper

The white PVC jacket protects the 16 stranded pure copper wires per channel for in-wall applications. Oxygen free copper conductors reduce resistance and support reliable signal transmission across three channels. UL certification and NEC 725 Class 2 rating confirm compliance for low voltage power limited circuits. Sequential 2ft markings in descending order from reel start to core allow accurate length tracking without separate measuring tools.

Verify Voltage and Circuit Compatibility

Confirm your LED system operates within the low voltage Class 2 limits this cable is rated for. Check that three conductors match your controller or driver wiring requirements. Ensure local code accepts UL certified NEC 725 Class 2 cable for the intended in-wall run. Buyers needing a different conductor count or gauge should select an alternative product.

Highlights

  • 50 ft reel simplifies long in-wall runs
  • 18 AWG three-conductor design carries low-voltage LED power
  • 16 stranded pure copper wires per channel reduce resistance
  • Oxygen-free copper conductors meet in-wall safety needs
  • UL certified NEC 725 Class 2 rating confirms code compliance

Specifications

No published specifications for this item yet.

Questions about this item

How often will the 18 AWG copper conductors need replacement in an in-wall installation?

The 16-strand oxygen-free copper conductors are rated for permanent in-wall use under NEC 725 Class 2 and do not have a scheduled replacement interval.

What is the first limit reached when running the full 50 ft length at maximum Class 2 current?

Voltage drop across the 18 AWG conductors becomes the limiting factor before the UL Class 2 current rating is exceeded.

Does the white PVC jacket get hot or emit noise when the cable powers LEDs continuously all day?

The cable carries only low-voltage Class 2 current, so the jacket remains near ambient temperature and produces no audible noise during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.