We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Assorted clear plastic 4-pin LED strip connectors and clips in a kit

TAURKENAM

TAURKENAM 5050 4Pin LED Strip Connector Kit power adapter

SKU CH-C0EG-S3B0Y

Solderless kit connects 10 mm 5050 and 3528 RGB strips with 10 corner, 10 gapless, 2 T-shape and 10 male-to-male plugs plus clips and extension cable

  • Tool-free snap installation — no soldering or cutting required
  • Complete kit with splitters, corners, T-shapes and gapless connectors
  • Flame-retardant PVC and tin-plated copper for durable connections
  • Rated for 0–4 A current and 0–24 V voltage input
  • Fits 10 mm 4-pin 5050 and 3528 RGB LED strips

Kit Contents

The TAURKENAM 5050 4Pin LED Strip Connector Kit supplies every piece needed to join, split and extend 10mm RGB strips without soldering. It includes a two-way splitter cable, two controller connectors, ten strip-to-strip wired connectors, ten corner connectors, two T-shape connectors, ten gapless connectors, twenty mounting clips, ten male-to-male connectors and one extension wire. The assortment suits DIY lighting projects of any layout.

Electrical Ratings

Connectors are built from flame-retardant PVC and tin-plated copper rated for continuous currents up to 4A and voltages up to 24V. The materials withstand operating temperatures from minus twenty to one hundred degrees Celsius. No active cooling or power circuitry is present, so the kit adds no noise or heat of its own during normal use.

Compatibility Limits

The kit fits 10mm wide 4-pin 5050 and 3528 RGB strips only; it will not work with 5-pin RGBW, addressable or wider strips. Buyers who need waterproof IP-rated joints, higher current capacity or compatibility with other strip widths must choose a different connector system.

Highlights

  • Tool-free snap installation — no soldering or cutting required
  • Complete kit with splitters, corners, T-shapes and gapless connectors
  • Flame-retardant PVC and tin-plated copper for durable connections
  • Rated for 0–4 A current and 0–24 V voltage input
  • Fits 10 mm 4-pin 5050 and 3528 RGB LED strips

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 10mm 5050 RGB strip to the gapless connector without soldering?

Open the clip, slide the 10mm 5050 strip under the metal contacts so the copper pads sit flat, then snap the clip shut; the tin-plated copper teeth pierce the pads for a tool-free connection.

Which parts of the kit wear out first and need replacing?

The flame-retardant PVC housings and tin-plated copper contacts are rated for -20 °C to 100 °C; only the 20 mounting clips may become brittle after prolonged heat exposure and need swapping.

At what current does the 4-pin connector hit its thermal limit during a long run?

The kit supports 0-4 A and 0-24 V; sustained loads near 4 A will reach the 100 °C heat-resistance ceiling first, so keep continuous current below that level.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.