We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open-frame 42U server rack, silver steel frame on casters, 19-inch mount, 31-inch depth

TAURKENAM

TAURKENAM 42U Open Frame Server Rack 19in 31in Depth 900lb

SKU CH-7ZEX-533JX

Open-frame 42U rack holds 19-inch gear at 31-inch post depth, supports 900 lb, rolls on casters and adjusts rails in 1.5-inch steps

  • Fits 19 inch standard equipment with 31 inch post-to-post depth
  • Supports up to 900 lb load capacity for heavy-duty use
  • Adjustable depth in 1.5 inch increments for flexible mounting
  • Includes M6 screws and cage nuts for immediate installation
  • Four-post open frame design with casters for mobility

42U Open Frame Rack for 19in Gear

This 42U open frame rack accepts 19in wide standard equipment with a 31in post-to-post mounting depth. Three pairs of steel rails provide square screw holes and the package includes M6 screws with cage nuts. The frame is built from cold-rolled aluminium and rated for a 900lb load capacity.

Passive Airflow and Silent Operation

The open design allows unrestricted airflow around installed devices without any fans, so the rack adds zero acoustic noise. Power draw is limited to the equipment you mount; the rack itself consumes no electricity. Cold-rolled aluminium construction keeps the structure light while maintaining the stated 900lb capacity.

Mobile Base Adjusts in 1.5in Steps

Assembled dimensions are 86in high, 24in wide and 39in deep including the caster base. The base depth adjusts in 1.5in increments, letting you match the footprint to available floor space. Four casters make the loaded rack movable for re-cabling or repositioning. Buyers needing enclosed sides, lockable doors or a deeper fixed chassis should consider a cabinet-style alternative.

Highlights

  • Fits 19 inch standard equipment with 31 inch post-to-post depth
  • Supports up to 900 lb load capacity for heavy-duty use
  • Adjustable depth in 1.5 inch increments for flexible mounting
  • Includes M6 screws and cage nuts for immediate installation
  • Four-post open frame design with casters for mobility

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 19 inch equipment rails at the correct 31 inch post-to-post depth?

Slide each of the three rail pairs onto the four posts and lock them at the 31 inch post-to-post setting using the 1.5 inch adjustment increments; the square holes accept the included M6 screws and cage nuts.

What maintenance will the caster base need after the rack is loaded near its 900 lb capacity?

Inspect the four casters every few months for flat spots, bearing noise or loose mounting bolts; tighten or replace any wheel that no longer rolls smoothly under the full load.

At what point does the 1.5 inch depth adjustment increment become the limiting factor when positioning deep servers?

The rails can only be locked at 1.5 inch steps, so if a server chassis requires a mounting depth that falls between two increments you cannot centre it precisely and must choose the nearest setting.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.