We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 42U four-post server rack, adjustable 24 to 38 inch depth, L rails, casters and leveling feet

TAURKENAM

TAURKENAM 42U 19" Adjustable Depth Server Rack 24-38" Black

SKU CH-38RH-YBCKJ

A 42U floor-standing 19-inch rack with adjustable 24-38 inch depth, 2.0mm steel construction, load-bearing casters for 1200lbs static load, and leveling feet rated to 1700lbs

  • Adjustable depth from 24 to 38 inches fits varied 19-inch gear
  • All-rivet 2.0 mm cold-rolled steel frame built for heavy loads
  • Three load-bearing casters hold 1200 lbs static weight
  • Leveling feet support up to 1700 lbs for stable placement
  • Horizontal L rails distribute equipment weight across the 42U frame

42U Adjustable-Depth Server Rack

This 42U floor-standing rack provides 19-inch mounting for network switches, servers, UPS units and other standard equipment. Adjustable top and bottom frames let you set the mounting depth between 24 and 38 inches (60 to 95 cm) to fit devices of varying lengths. All-rivet construction uses 2.0 mm cold-rolled steel for a rigid four-post frame. It suits home labs, test environments, small data centres and office installations.

Depth Range and Load Limits

The 24-to-38-inch adjustable depth determines which 19-inch gear will fit; equipment deeper than 38 inches cannot be mounted. Leveling feet support a static load up to 1700 lbs, while the three load-bearing casters are rated for 1200 lbs. Horizontal L-rails distribute equipment weight across the frame and add structural stiffness whether the rack is empty or fully populated.

Pre-Installation Checks

Verify that your deepest device does not exceed the 38-inch maximum mounting depth before ordering. Confirm the floor can handle the combined weight of the rack plus installed hardware, especially if you rely on the casters rather than the leveling feet. Ensure the intended room provides enough clearance for the 42U height and for cable management rings on the frame.

Highlights

  • Adjustable depth from 24 to 38 inches fits varied 19-inch gear
  • All-rivet 2.0 mm cold-rolled steel frame built for heavy loads
  • Three load-bearing casters hold 1200 lbs static weight
  • Leveling feet support up to 1700 lbs for stable placement
  • Horizontal L rails distribute equipment weight across the 42U frame

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 24-inch or 38-inch mounting depth for my 19-inch equipment?

The frame adjusts continuously from 24 to 38 inches (60 to 95 cm) so you can set the exact depth your 19-inch devices need without choosing a fixed option.

What does the 1700 lbs figure mean once the rack is on my floor?

With the leveling feet deployed the rack supports a static load of 1700 lbs; on the three load-bearing casters the rating is 1200 lbs.

How does the 19-inch EIA standard affect what I can mount?

The rack follows the 19-inch EIA spacing, so any standard 19-inch server, switch, UPS or patch panel will bolt directly to the adjustable L rails.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.