TAURKENAM
TAURKENAM 4 Ft 10/3 SRDT 30A NEMA 10-30 Power Adapter
A four-foot, 10-gauge, 30-amp NEMA 10-30 extension cord with a flat plug, ETL certification and thermoplastic SRDT sheath for dryer connections
- Flat plug sits flush against the wall for tight spaces
- 3-wire design with color-coded ring terminals simplifies installation
- Thermoplastic SRDT sheath insulates against overheating for safe operation
- ETL certified 10 gauge cord rated 30 A at 125/250 V
- Side-grip plug allows secure insertion and removal
TAURKENAM 4 Ft Dryer Power Cord
This TAURKENAM power adapter is a 4-foot NEMA 10-30 cord built with 10/3 SRDT cable. It supplies 30 amps at 125/250 volts for up to 3750 watts. The flat plug design sits flush against the wall outlet. Molded ring terminals and color-coded wires simplify the connection to a compatible dryer or appliance.
Who This Suits and Who Should Look Elsewhere
This cord suits owners of dryers or appliances requiring a NEMA 10-30 three-wire connection. It fits installations where a low-profile flat plug saves space behind the unit. Buyers whose appliance requires a four-wire NEMA 14-30 connection cannot use this cord. Installations demanding a longer reach than four feet will need a different length.
Deciding Specification: NEMA 10-30 Three-Wire Plug
The single specification that decides fitment is the NEMA 10-30 three-prong plug configuration. This older standard provides two hot conductors and a neutral but no separate ground pin. Verify that the appliance and the wall receptacle both use NEMA 10-30 before purchasing. ETL certification confirms the 10-gauge, 30-amp rating.
Highlights
- Flat plug sits flush against the wall for tight spaces
- 3-wire design with color-coded ring terminals simplifies installation
- Thermoplastic SRDT sheath insulates against overheating for safe operation
- ETL certified 10 gauge cord rated 30 A at 125/250 V
- Side-grip plug allows secure insertion and removal
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 10/3 SRDT dryer cord and what step is often missed?
Connect the color-coded wires to the matching terminals using the molded ring terminals, then secure the strain-relief clamp — many forget to tighten the clamp, leaving the cord loose.
What maintenance or replacement will the NEMA 10-30 adapter need over time?
Inspect the thermoplastic SRDT sheath and plug blades annually for cracks or discoloration; replace the cord if the insulation hardens or the grip loosens.
What limit appears first during sustained 30 A use?
The 10-gauge conductors reach their 3750 W thermal ceiling before the ETL-rated plug or receptacle shows stress.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115247BTC
In stock
