We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Open-frame 3U wall-mount rack, 19-inch width, black powder-coated steel with reinforced joints

TAURKENAM

TAURKENAM 3U 19" Wall Mount Server Rack 66-99 LBS

SKU CH-F0PF-F4ZE2

A 3U open-frame bracket holds 19-inch network, server or audio gear vertically or horizontally, supports 66-99 LBS on 2.0 mm cold-rolled steel with reinforced joints.

  • TypeSee Description
  • Fits 19-inch standard equipment in tight spaces
  • Supports 66-99 LBS with 2.0mm cold-rolled steel
  • Powder coating and reinforced joints resist torsion
  • Includes M6 screws, cage nuts, M5 screws, wall bolts
  • Assembles in minutes with supplied instructions

3U Wall-Mount Rack for 19-Inch Gear

This 3U open-frame bracket mounts standard 19-inch network, server, NAS and audio equipment. It installs vertically or horizontally to fit tight spaces such as wiring closets, studios or home labs. Cold-rolled steel construction with powder coating and reinforced joints delivers a 66-99 LBS load rating. All mounting hardware and instructions are included for a fast setup.

Suits Compact Installs, Not Deep Chassis

The rack works well for patch panels, switches, shallow servers and AV gear where floor space is unavailable. Vertical or horizontal orientation lets you adapt to the wall layout. Builders needing enclosed cabinets, deeper shelves or higher weight limits should consider full-depth floor-standing frames instead. No doors, side panels or cable-management trays are provided.

66-99 LBS Load Rating Decides Fit

The single figure that determines whether this bracket will hold your equipment is the 66-99 LBS maximum load. Add the weight of every device you plan to mount and confirm the total stays within that range. Exceeding it risks structural failure and voids the intended safety margin.

Highlights

  • Fits 19-inch standard equipment in tight spaces
  • Supports 66-99 LBS with 2.0mm cold-rolled steel
  • Powder coating and reinforced joints resist torsion
  • Includes M6 screws, cage nuts, M5 screws, wall bolts
  • Assembles in minutes with supplied instructions

Specifications

TypeSee Description

Questions about this item

Is the 19-inch width the standard EIA rack spacing so my patch panels and switches line up?

The rack accepts 19-inch standard-width equipment, matching the common EIA spacing used for patch panels, switches, servers and audio gear.

What wall structure and hardware are needed to hold the 66-99 lb rating?

Mounting bolts are supplied; you must anchor them into studs, concrete or masonry rated for at least the loaded weight. Drywall alone will not support 66-99 lbs.

Which screws go where during assembly, and what is the step people miss?

Use M6 screws with cage nuts for the 19-inch equipment rails, M5 screws for the rack’s own joints, and wall bolts for the structure. The step often missed is tightening the middle reinforced joints before hanging the unit.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.