We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 2U vented cantilever shelf for 19 inch rack, adjustable 14 to 17 inch depth

TAURKENAM

TAURKENAM 2U Vented Server Rack Shelf 14-17 inch Depth 19 inch 44 lb

SKU CH-8HE9-F3WAJ

A 2U vented cantilever shelf fits 19-inch racks, adjusts from 14 to 17 inches deep, and holds 44 pounds

  • Fits standard 19-inch racks and cabinets
  • Adjustable depth from 14 to 17 inches
  • Two-degree upward tilt supports up to 44 pounds
  • Quality steel construction ensures long-lasting durability
  • Vented body promotes airflow and heat dissipation

Universal 19-inch rack shelf for non-rackmount gear

This vented cantilever tray mounts in a standard 19-inch rack and holds IT, networking or AV equipment that lacks its own rack ears. The 2U profile keeps the footprint small while the adjustable depth lets you position devices exactly where cable runs and airflow work best. It ships disassembled with all mounting screws included for quick installation.

Cantilever limits for front-mounted loads

Because the tray cantilevers from the front rails only, the 44-pound rating applies to evenly distributed static weight centred on the shelf. Deep or front-heavy appliances can exceed the lever-arm capacity even when the scale reads less, so plan for the centre of gravity rather than the gross figure alone. The two-degree upward tilt helps counter deflection but does not increase the rated limit.

14-to-17-inch depth range decides fit

Slide the tray to any depth between 14 and 17 inches to match your rack’s rail spacing and the chassis you are supporting. If your cabinet rails are spaced outside this window or your gear needs a deeper platform, this shelf cannot accommodate the installation.

Highlights

  • Fits standard 19-inch racks and cabinets
  • Adjustable depth from 14 to 17 inches
  • Two-degree upward tilt supports up to 44 pounds
  • Quality steel construction ensures long-lasting durability
  • Vented body promotes airflow and heat dissipation

Specifications

No published specifications for this item yet.

Questions about this item

How do I decide which depth setting to use between 14 and 17 inches?

Measure the deepest piece of equipment you plan to place on the shelf, then set the cantilever arms so the tray extends at least that far while still clearing the rear rack posts.

What does the 44 lb load rating mean once the shelf is mounted in my rack?

The 44 lb figure is the maximum evenly distributed weight the steel tray can support when secured to both front posts; the 2-degree upward tilt helps counteract sag under load.

How does the 19-inch rack standard affect what I can mount on this tray?

The tray bolts to any standard 19-inch wide rack or cabinet, so any equipment that sits on a flat surface — not rack-mount ears — can be placed on the vented steel platform.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.