We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM 2ft 18AWG 600W 125V power adapter 4-pack

SKU CH-1R3K-4BH6G

Two-foot 18AWG extension cords with 3-prong plugs deliver 600 W at 125 V for T5/T8 LED fixtures, four per pack

  • 2-foot cord extends reach to distant outlets
  • 18AWG copper core rated for 600W at 125V
  • Female-to-male connectors fit T5/T8 LED fixtures
  • Four-pack covers multiple lights in one purchase
  • White jacket blends with garage and workshop ceilings

2 ft 18 AWG Extension Cord Pack

This four-pack supplies 2-foot white extension cords with a 3-prong US plug on one end and a female IEC connector on the other. They are built to power T5 and T8 integrated LED tube fixtures from 2 ft to 8 ft in length. Installers gain extra reach to the nearest outlet without rewiring the fixture.

Sustained Load on 18 AWG Copper

Each cord uses an 18 AWG conductor with a .824 mm copper core rated for 600 W at 125 V. The thicker core limits temperature rise when the fixture runs continuously in a garage, workshop or warehouse. Heat stays low enough that the cord remains safe to touch during extended operation.

600 W 125 V Rating Decides Fit

The single figure that determines compatibility is the 600 W at 125 V limit. Any fixture drawing more power or operating at a higher voltage needs a different cord. Buyers who need longer runs or higher wattage cannot use this pack.

Highlights

  • 2-foot cord extends reach to distant outlets
  • 18AWG copper core rated for 600W at 125V
  • Female-to-male connectors fit T5/T8 LED fixtures
  • Four-pack covers multiple lights in one purchase
  • White jacket blends with garage and workshop ceilings

Specifications

No published specifications for this item yet.

Questions about this item

Does the 18 AWG cord stay cool when running a 600 W load all day?

The 18 AWG cable with its 0.824 m copper core is rated for a maximum of 600 W at 125 V and is designed not to get hot under that load.

What fixture connector does the female end need to match on my T5 or T8 LED tube light?

The female connector attaches directly to the power-input end of an integrated T5 or T8 LED tube fixture.

Will the male 3-prong US plug work with the older workshop outlets I already have?

Yes, the male connector is a standard US 3-prong plug that fits ordinary 125 V outlets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.