TAURKENAM
TAURKENAM 22 AWG 3 Conductor Wire WS2811 WS2812b 3Pin RGB Extension Cable 20m Spool
22 AWG three-conductor extension cable on a 20 m spool for WS2811 and WS2812B RGB strips, rated 0-4 A and 0-24 V
- OFC copper delivers maximum conductivity for reliable signal transmission
- Supports up to 4 A current and 24 V for WS2811 and WS2812B LED strips
- 20 m spool provides 66 ft of cable for most extension jobs
- Plastic spool allows cutting custom lengths and tidy storage of the remainder
- Tinned copper resists oxidation, reduces heat and extends cable life
20-metre RGB extension cable
This 20-metre spool of 22 AWG three-conductor wire is designed to extend WS2811 and WS2812B addressable LED strip runs. Oxygen-free copper conductors and a stranded layout give high conductivity while staying flexible for routing through tight channels.
Installers needing 0-4 A at up to 24 V
The cable supports a continuous current range of 0-4 A and a voltage input of 0-24 V, matching the requirements of standard WS2811 and WS2812B dream-colour strips. Builders who need a higher current rating or a different pin configuration should look at something else.
Sustained load on a spooled run
Tinned copper strands resist oxidation and reduce heat build-up during extended operation, keeping voltage drop stable over the full 66-foot length. The plastic spool lets you cut exact lengths and store the remainder without tangling or kinking.
Highlights
- OFC copper delivers maximum conductivity for reliable signal transmission
- Supports up to 4 A current and 24 V for WS2811 and WS2812B LED strips
- 20 m spool provides 66 ft of cable for most extension jobs
- Plastic spool allows cutting custom lengths and tidy storage of the remainder
- Tinned copper resists oxidation, reduces heat and extends cable life
Specifications
No published specifications for this item yet.
Questions about this item
What LED strip controller or power supply do I need to run this 3-pin cable?
You need a WS2811 or WS2812B addressable LED strip controller and a power supply that delivers 0-24 V at up to 4 A to match the cable's rated input range.
Can I use this extension with my existing 22 AWG LED strip wiring?
Yes, the cable uses 22 AWG tinned copper conductors, so it matches the gauge of standard 22 AWG strip pigtails and can be soldered or connected directly.
How do I verify the cable is carrying data and power correctly after installation?
Apply power and send a colour pattern from the controller; all LEDs should display the programmed colours without flicker or voltage drop along the 20 m length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
