We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black metal vented 1U cantilever rack shelves with flip mounting ears

TAURKENAM

TAURKENAM 2 PCS 12in 1U Vented Cantilever Rack Shelves

SKU CH-VT9H-AYAM8

Two 1U vented cantilever shelves, 19 inches wide by 12 inches deep, with flip lips and welded corners for 19-inch racks

  • Vented design speeds heat dissipation for cooler equipment
  • Welded corner joints resist loads and deformation
  • Flip lips install up or down for flexible device fit
  • Two shelves plus screws and cage nuts included
  • Fits 19 inch racks with 12 inch depth

12-inch 1U vented cantilever rack shelves

This pair of 1U shelves mounts in standard 19-inch racks and cabinets. Each tray measures 12 deep by 1.7 high and uses a vented steel surface to promote airflow around installed equipment. The set suits network hardware, audio gear and similar IT devices that need open-air cooling in a compact footprint.

Detachable flip-lip ears for two mounting

Mounting ears ship detached to avoid transit damage and bolt onto the shelf with either the lip facing up or down. Lips up creates a raised edge that helps keep shallow devices from sliding forward. Lips down clears the front face for deeper chassis that would otherwise contact the lip. Pre-drilled cable tie holes are provided for basic cable management.

Verify 19-inch rack spacing

Confirm the rack provides standard 19-inch wide mounting holes and at least 12 inches of clear depth between front and rear rails. The 1U height occupies a single rack unit so ensure vertical space is available. No additional hardware beyond the included screws and cage nuts is required for installation.

Highlights

  • Vented design speeds heat dissipation for cooler equipment
  • Welded corner joints resist loads and deformation
  • Flip lips install up or down for flexible device fit
  • Two shelves plus screws and cage nuts included
  • Fits 19 inch racks with 12 inch depth

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 1U 12in shelf is seated correctly in my 19in rack?

The shelf mounts on standard 19in posts; when the detachable ears are bolted flush and the vented tray sits level, the 1.7in height confirms a proper 1U fit.

What ships with the two shelves and what must I source separately?

The box contains two 12in vented cantilever trays plus mounting screws and cage nuts; no extra hardware is required for a standard 19in rack.

Which depth should I pick among the 6, 8, 10 and 12in options?

Choose the 12in depth when your equipment needs the full 12in of usable tray space; select 6, 8 or 10in for shallower devices to save rack depth.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.