We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 1U vented cantilever shelves 19 wide 12 deep powder coated steel

TAURKENAM

TAURKENAM 2× 1U 12" Vented Cantilever Rack Shelf 19" Black

SKU CH-M6SB-W7JEC

Two 1U vented cantilever shelves fit 19-inch racks, hold non-rack gear up to 12 inches deep and support 30 lbs each

  • TypeSee Description
  • Fits standard 19" racks with 12" depth for non-rack gear
  • Vented design maximises airflow to keep equipment cool
  • Cold-rolled steel with powder coat supports up to 30 lbs
  • Two-step assembly using included M6 screws and cage nuts
  • Two shelves included, each 1U high with 17.2" usable width

1U 12-inch vented cantilever shelf

This pair of 1U shelves fits any standard 19-inch rack and provides 12 inches of usable depth for non-rackmount IT, networking or AV equipment. Each tray offers a usable area of 17.2 by 11.90 inches and supports up to 30 lbs. The ventilated steel construction promotes airflow around the mounted devices.

Suited for shallow gear in standard racks

Ideal for administrators who need to install routers, switches, modems or small appliances that are less than 12 inches deep. Not suitable for equipment deeper than 11.90 inches or heavier than 30 lbs per shelf. Builders requiring enclosed drawers or sliding rails should consider a different form factor.

Mounts directly to 19-inch posts

Supplied M6 screws and cage nuts attach the cantilever brackets to the rack uprights in two steps. The 1U height preserves vertical space for other units. Cold-rolled steel with powder coating resists wear. Ventilation slots reduce the need for forced-air accessories around the installed hardware.

Highlights

  • Fits standard 19" racks with 12" depth for non-rack gear
  • Vented design maximises airflow to keep equipment cool
  • Cold-rolled steel with powder coat supports up to 30 lbs
  • Two-step assembly using included M6 screws and cage nuts
  • Two shelves included, each 1U high with 17.2" usable width

Specifications

TypeSee Description

Questions about this item

What rack width must the cabinet have for these 19-inch shelves to mount?

The shelves fit any standard 19-inch server rack or cabinet, using the included M6 screws and cage nuts for installation.

Will the 12-inch depth limit which of my existing non-rack devices can sit on the tray?

Yes, only equipment less than 12 inches deep fits; usable depth is 11.90 inches so measure each device before placing it.

How can I confirm the vented tray is moving enough air to keep gear cool after I install it?

Check that equipment temperatures stay within normal ranges; the ventilated design maximises air circulation across the 17.2-inch usable width.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.