We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 1U rack panel with eight D-series cutouts and hinged front

TAURKENAM

TAURKENAM 1U Hinged Rack Panel 8D XLR HDMI 19" 1.73

SKU CH-RVSW-6R3P2

A 1U hinged rack panel with eight D-Series punch-outs for XLR and HDMI connectors in 19-inch racks

  • TypeSee Description
  • 1U panel fits standard 19-inch racks
  • Hinged cover gives quick rear access
  • Eight D-Series cut-outs ready for XLR
  • Four pins per cut-out simplify connector fitting
  • 73-inch height uses only one rack unit

1U Hinged Rack Panel with 8 D-Series Cutouts

This TAURKENAM panel occupies a single rack unit in a standard 19-inch enclosure and provides eight D-Series punch-out positions. The hinged front section swings open to simplify cable routing and ongoing maintenance behind the panel. Each cutout is surrounded by four mounting pins that accept a variety of XLR connectors and similar hardware. It is intended for audio, video and compute racks that need a dense, serviceable connector field.

Installation Constraints

The panel fits only 19-inch racks with 1U vertical spacing and requires that each connector used matches the D-Series footprint and the four-pin mounting pattern. Connectors with different hole spacing or larger bodies will not align with the pins provided. The hinged mechanism needs clearance in front of the rack to swing fully open; shallow cabinets or doors that close tight against the panel will prevent access. No screws or connectors are included, so installers must supply compatible hardware.

Eight D-Series Punch-Outs

The decisive specification is the count and type of cutouts: eight D-Series openings in a 1U panel. If a build needs fewer than eight positions, a different panel will leave unused gaps; if it needs more, a second panel or a higher-density design is required. Buyers who need a different connector series, a non-hinged blank plate or a panel for a rack width other than 19 inches cannot use this part.

Highlights

  • 1U panel fits standard 19-inch racks
  • Hinged cover gives quick rear access
  • Eight D-Series cut-outs ready for XLR
  • Four pins per cut-out simplify connector fitting
  • 73-inch height uses only one rack unit

Specifications

TypeSee Description

Questions about this item

Should I choose a panel with more or fewer than 8 D-Series punch-outs?

This panel provides exactly 8 D-Series punch-outs across a 19-inch width, so choose it when you need eight connector positions in a single 1U space.

How does the 1.73-inch height affect usable rack space?

The panel occupies precisely 1U (1.73 inches) of vertical rack height, leaving the remaining rack units free for other equipment.

What connectors can the D-Series punch-outs accept in practice?

Each punch-out has four mounting pins and accepts various XLR connector types, letting you populate the panel with the specific audio connectors your installation requires.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.