We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1U 19-inch vertical wall mount server rack with powder-coated finish

TAURKENAM

TAURKENAM 1U 19" Vertical Wall Mount Server Rack 125lbs

SKU CH-RKYC-EPP86

A fully assembled 1U vertical wall-mount bracket holds standard 19-inch servers or switches up to 125 lbs and includes all mounting hardware

  • Fully assembled — no build time required
  • 0 mm steel construction rated for 125 lbs
  • Mounts vertically on walls or horizontally under desks
  • Fits standard 19 in EIA-310 equipment
  • Includes wood screws, M6 hardware and level

1U 19" Vertical Wall Mount Rack

The TAURKENAM 1U vertical wall mount rack is a fully assembled bracket built to EIA-310 19in standards for network and server equipment. It supports a maximum load of 125 pounds using 2.0 mm thick powder-coated metal. The unit fits standard 19in rack-mount gear in tight spaces where a full cabinet is impractical.

Replaces Floor-Standing Cabinets in Tight Rooms

This bracket replaces a floor-standing enclosure when floor space is unavailable and the total equipment weight stays within the 125-pound limit. The jump is worth it for single-switch or patch-panel deployments in closets, corridors or small offices. It is not suited for multi-device stacks that exceed the rated capacity or require locked doors and side panels.

Holds One 1U Device Up to 125 lbs

The rack comfortably handles a single 1U switch, server or patch panel within the 125-pound rating and the 5.9in height allowance. Depth is limited to the 2.3in bracket projection, so deeper chassis or multi-unit loads will not fit. Installers needing deeper shelves, cable managers or heavier aggregates must look elsewhere.

Highlights

  • Fully assembled — no build time required
  • 0 mm steel construction rated for 125 lbs
  • Mounts vertically on walls or horizontally under desks
  • Fits standard 19 in EIA-310 equipment
  • Includes wood screws, M6 hardware and level

Specifications

No published specifications for this item yet.

Questions about this item

What wall space does the 19.29-inch wide 1U bracket need for vertical or horizontal mounting?

The unit measures 19.29 inches wide, 5.9 inches high and 2.3 inches deep, so allow that footprint plus clearance for cables when mounting vertically on a wall or horizontally under a desk.

Which hardware and tool are supplied for securing the rack to the wall, and what common step is missed?

Six wood screws and a horizontal bubble are included; the step often missed is using the bubble to level the bracket before driving all screws.

What ongoing checks does the 2.0 mm powder-coated steel rack with 125-pound capacity require?

Periodically verify that the wood screws and M6 cage nuts remain tight and inspect the powder-coated finish for corrosion, especially in humid environments.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.