We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal wall-mount server rack brackets, 19 inch, 4U height, 300mm depth

TAURKENAM

TAURKENAM 19 Inch Vertical Ends Wall Mount Server Rack 4U 300mm Depth

SKU CH-FKVS-V34V3

Wall-mountable 19 inch server rack bracket set with 300 mm rear mounting depth, fitting 1U to 4U chassis between 428 mm and 430 mm wide

  • TypeSee Description
  • Universal fit for 1U–4U equipment
  • 19 inch rack standard matches 428–430 mm chassis
  • Rear mounting kit positions gear at 300 mm depth
  • One unit supplies two stacked brackets, two plates and hardware
  • Vertical-end wall design saves floor space

19 Inch 4U Vertical Wall Mount Rack

This TAURKENAM rack mounts 19 inch equipment vertically on a wall using a rear and central mounting kit. One unit supplies a pair of stacked brackets, two mounting plates and an accessory pack. The design accepts chassis heights of 1U through 4U and fits widths between 428mm and 430mm. Rear mounting depth is fixed at 300mm.

Suits Shallow Vertical Mounts Not Deep Cabinets

Builders needing a shallow 300mm deep vertical wall bracket for 1U to 4U servers will find this kit matches the width and hole pattern. Installations requiring deeper enclosures, adjustable depth rails, full cabinet doors or floor standing capacity should look at other solutions. The fixed 300mm rear mount depth cannot be extended.

300mm Fixed Rear Mounting Depth Decides Fit

The single specification that determines compatibility is the 300mm rear mounting kit depth. Measure the chassis from its front mounting ears to the rear of the unit; if that distance exceeds 300mm the server will not fit. Chassis width must also fall within the 428mm to 430mm range for the universal brackets to align.

Highlights

  • Universal fit for 1U–4U equipment
  • 19 inch rack standard matches 428–430 mm chassis
  • Rear mounting kit positions gear at 300 mm depth
  • One unit supplies two stacked brackets, two plates and hardware
  • Vertical-end wall design saves floor space

Specifications

TypeSee Description

Questions about this item

What rack standard does the 19 inch vertical ends mount support and what depth does it cap at?

It follows the 19 inch rack standard and the rear mounting kit depth is fixed at 300mm.

What physical dimensions must the chassis meet to fit these brackets?

The chassis width must be between 428mm and 430mm and the bracket height covers 1U to 4U devices.

How are the brackets installed and which step is commonly missed?

Bolt the two stacked brackets to the wall, attach the mounting plates to the chassis sides using the correct hole pattern, then slide the chassis into the brackets; the step often missed is matching the plate holes to the specific chassis hole spacing before tightening.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.