We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel 19-inch 1U cantilever shelf with slotted venting 200mm deep 40LB capacity

TAURKENAM

TAURKENAM 19 inch 1U vented cantilever server rack shelf 200mm deep 40LB

SKU CH-R25A-8CFZV

A vented 1U cantilever shelf mounts in a 19‑inch rack, holds up to 40 lb and includes M6 hardware

  • TypeSee Description
  • Fits standard 19 inch racks for tower units and monitors
  • Cold rolled steel with powder coat resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Supports up to 40LB load while remaining lightweight
  • M6 screws and cage nuts included for quick mounting

19-inch vented cantilever shelf

This 1U cantilever shelf mounts to standard 19-inch rack posts and supports tower units, monitors or similar equipment. Cold-rolled steel with a powder-coated finish resists rust and corrosion. Slotted venting promotes airflow around the installed gear. The shelf carries up to 40LB and ships with M6 screws and cage nuts.

Check rack depth and weight budget

Verify that your rack provides at least 200mm of usable depth behind the front posts for the cantilever tray. Ensure the combined weight of the equipment you plan to place on the shelf does not exceed the 40LB capacity. Confirm the front posts accept M6 hardware so the included screws and cage nuts can be used without adapters.

Sustained load behaviour

The powder-coated steel construction maintains its rigidity under continuous 40LB loading without permanent deflection. Slotted venting allows steady convective airflow, so equipment temperatures remain stable during extended operation. The cantilever design transfers load directly to the front posts, so rack stability depends on the cabinet being properly anchored and levelled.

Highlights

  • Fits standard 19 inch racks for tower units and monitors
  • Cold rolled steel with powder coat resists rust and corrosion
  • Slotted vent pattern maximises airflow through the shelf
  • Supports up to 40LB load while remaining lightweight
  • M6 screws and cage nuts included for quick mounting

Specifications

TypeSee Description

Questions about this item

What mounting hardware is included and do I need to buy anything else to install the shelf?

The package includes M6 screws and cage nuts, so no extra fasteners are required for a standard 19-inch rack.

Should I choose a different depth if my equipment is deeper than 200 mm?

This shelf is 200 mm deep; equipment that extends further will overhang, so select a deeper model if full support is needed.

What does the 40 lb capacity mean when the shelf is mounted in a rack?

It is the maximum evenly distributed load the cold-rolled steel shelf can hold while cantilevered in a 19-inch rack.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.