We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12V 3A power brick, small 2-port RGB control box with IR receiver, 44-key silver remote

TAURKENAM

TAURKENAM 12V 3A 36W power adapter with 44-key IR RGB controller and 2-port output

SKU CH-4GH4-3N1DK

A 12V 36W power adapter with a 44-key IR remote and dual 4-pin outputs for controlling two RGB LED strips

  • Choose from 20 static colours and multiple dynamic modes via the 44-key IR remote
  • Power 12 V LED strips with the included 36 W 100-240 V adapter
  • Connect two RGB strips simultaneously through the dual 4-pin output ports
  • Compatible with 5050, 2835 and 3528 RGB LED tape
  • Extend installations using the two supplied 3.3 ft extension cables

Power adapter kit for RGB strip lighting

This kit provides a 12V 3A 36W power supply paired with a 44-key IR controller and two-port output box. It targets DIYers and installers who want to drive two reels of 5050, 2835 or 3528 RGB LED strip from a single mains connection. The bundle also includes two 3.3 ft extension cables and six 4-pin male-to-male connectors for quick assembly. Everything arrives new and ready to wire.

12V 3A 36W output with 100-240V input

The adapter accepts 100-240V 50/60Hz mains and delivers a regulated 12V DC at up to 3A, totalling 36W. This single rating decides compatibility: the kit will not power 24V LED strips, and total attached load must stay within 36W. The two output ports on the control box split this budget between both connected reels.

IR remote requires line of sight to the receiver

The 44-key remote offers 20 static colours plus flash, strobe, fade, smooth-change and DIY modes, but it must point at the IR receiver without obstacles. Arrows on the box and strip connectors must align during wiring. The package supplies the power adapter, controller box, remote, extensions, connectors and a manual; no other components are included. Buyers needing longer runs, higher wattage or 24V operation should look elsewhere.

Highlights

  • Choose from 20 static colours and multiple dynamic modes via the 44-key IR remote
  • Power 12 V LED strips with the included 36 W 100-240 V adapter
  • Connect two RGB strips simultaneously through the dual 4-pin output ports
  • Compatible with 5050, 2835 and 3528 RGB LED tape
  • Extend installations using the two supplied 3.3 ft extension cables

Specifications

No published specifications for this item yet.

Questions about this item

What does the 36 W rating mean for the LED strips I can run?

The 12 V 3 A output delivers up to 36 W, enough for two reels of 5050, 2835 or 3528 RGB strip within that power budget.

What does the 100–240 V input actually let me do?

The adapter accepts any mains voltage from 100 to 240 V at 50 or 60 Hz, so it works worldwide with only a plug adapter.

How do the two 4-pin ports and 3.3 ft extensions affect installation?

The control box has two 4-pin outputs; each can drive one strip reel, and the included 3.3 ft extensions give extra reach between the box and the strips.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.