We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten-foot black SJT cable with three-prong NEMA 5-15P plug on one end and stripped bare wires on the other

TAURKENAM

TAURKENAM 10ft 14AWG 15A NEMA 5-15P to bare end power adapter

SKU CH-Q7CX-YFG72

A 10 ft, 14 AWG heavy-duty cord with a NEMA 5-15P plug and stripped bare end, rated 15 A at 120 V for appliance repair or DIY wiring

  • 10 ft reach for flexible appliance placement
  • 14 AWG fine-stranded copper handles 15 A loads
  • SJT jacket rated 300 V and 105 °C for durability
  • UL approved for safe, code-compliant installations
  • Stripped bare end speeds up DIY wiring projects

10ft 14AWG NEMA 5-15P power adapter

This 10-foot power adapter features a NEMA 5-15P plug on one end and bare wires on the other for direct termination. It is built with 14AWG SJT cable rated for 300 volts and 105 degrees Celsius. The cord suits DIY repairs, appliance rewiring and custom controller builds where a moulded connector is not required. UL approval confirms compliance with North American safety standards.

15 amp 1875 watt capacity and headroom

The 14-gauge conductors carry up to 15 amps at 120 volts, delivering a maximum of 1875 watts. This headroom handles most household appliances such as grinders, freezers and dishwashers without voltage drop over the full length. Fine-stranded copper ensures flexibility during installation while maintaining low resistance. Loads exceeding 15 amps or continuous operation near the limit will require a heavier gauge cable.

Thermals noise and power draw in normal use

The SJT jacket is rated to 105 degrees Celsius, so the insulation remains stable under full rated load in typical ambient conditions. As a passive copper cord it produces no audible noise and draws no power of its own. Heat rise stays within the cable’s temperature rating when the connected device operates within the 15 amp specification. Exceeding the rated current will increase conductor temperature beyond the certified limit.

Highlights

  • 10 ft reach for flexible appliance placement
  • 14 AWG fine-stranded copper handles 15 A loads
  • SJT jacket rated 300 V and 105 °C for durability
  • UL approved for safe, code-compliant installations
  • Stripped bare end speeds up DIY wiring projects

Specifications

No published specifications for this item yet.

Questions about this item

Will the NEMA 5-15P plug on this 14 AWG cord fit the standard US wall outlet my older appliance already uses?

Yes, the NEMA 5-15P male plug is the standard three-prong 120 V connector used on most North American appliances and wall outlets.

How can I confirm the SJT 14/3 cable is rated for the 15 A load my equipment draws?

The jacket is marked SJT, 300 V, VW-1, 105 °C, 14 AWG, and the assembly carries a 15 A / 1875 W rating with UL approval.

Does the package include wire connectors or terminals for the bare-end side, or must I supply them?

Only the 10 ft cord with stripped insulation on the bare end is included; you must provide your own connectors, terminals, or splicing hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.