We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled black PVC cable on spool with sequential length markings

TAURKENAM

TAURKENAM 100 ft 18AWG 3 Conductor LED Cable

SKU CH-4MBG-KN89B

100 ft 18AWG three-conductor cable with 16-strand oxygen-free copper per channel, UL certified to NEC 725 Class 2 for in-wall LED and speaker runs

  • 100 ft reel covers long in-wall runs
  • 18 AWG three-conductor design handles low-voltage LED loads
  • 16 stranded pure copper wires per channel reduce resistance
  • Oxygen-free copper conductors meet in-wall fire-safety needs
  • UL certified to NEC 725 Class 2 for code compliance

100 ft 18AWG 3 Conductor LED Cable

This 100 ft cable supplies low-voltage power to three-channel LED installations. It uses 18 AWG oxygen-free copper conductors for in-wall runs and carries a UL listing under NEC 725 Class 2. The black PVC jacket protects the conductors during pulls through studs and joists.

Installation notes and common issues

Sequential 2' length markings printed on the jacket let you measure cuts without a tape measure. Each channel contains 16 stranded pure copper wires that remain flexible in cold temperatures. The most common error is exceeding the Class 2 current limit for the run length, which can cause voltage drop at the far end.

Class 2 low-voltage limits

NEC 725 Class 2 rating restricts the circuit to the voltage and power levels defined by that code section. The cable is not rated for mains-voltage branch circuits or for direct burial without additional protection. Installers must verify that the connected power supply and load stay within the Class 2 parameters for the full 100 ft distance.

Highlights

  • 100 ft reel covers long in-wall runs
  • 18 AWG three-conductor design handles low-voltage LED loads
  • 16 stranded pure copper wires per channel reduce resistance
  • Oxygen-free copper conductors meet in-wall fire-safety needs
  • UL certified to NEC 725 Class 2 for code compliance

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the cable is rated for in-wall use after installation?

Check the jacket for the UL listing and NEC 725 Class 2 rating printed along the black PVC sleeve.

What comes on the reel and what must I supply myself?

The reel provides 100 ft of 18 AWG three-conductor cable with 16 stranded pure copper wires per channel; you must supply connectors, tools and any mounting hardware.

Which gauge and conductor count should I select for a low-voltage LED run?

This item is an 18 AWG three-conductor cable with oxygen-free copper conductors designed for low-voltage LED and in-wall applications.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.