We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM 100 ft 18AWG 2 Conductor LED Cable power adapter

SKU CH-J8Z9-ZVJ15

100 ft 18AWG two-conductor LED cable with 99.99% oxygen-free copper, UL certified and sunlight-resistant for in-wall and outdoor use

  • 100 ft reel covers long runs without splicing
  • 18 AWG with 16 stranded pure-copper wires per conductor ensures low resistance
  • 99 % oxygen-free copper maintains signal integrity over distance
  • UL certified to NEC 725 Class 2 for safe in-wall and outdoor installs
  • Sunlight-resistant black PVC jacket protects against UV and weather
  • Sequential 2 ft descending length markings simplify measuring and cutting

100 ft 18AWG Low-Voltage LED Cable

This 100 ft reel of 18AWG two-conductor cable is built for low-voltage LED lighting runs both indoors and outdoors. Each channel contains 16 stranded pure-copper wires with 99.99 % oxygen-free conductors. The sunlight-resistant black PVC jacket is UL certified and meets NEC 725 Class 2 requirements for in-wall installation. Sequential 2 ft markings simplify measuring and cutting to length.

Replacing Thinner or Non-Rated Wire

Installers upgrading from lighter gauge or non-Class 2 cable gain a conductor cross-section rated for permanent in-wall and outdoor exposure. The oxygen-free copper reduces resistance on longer runs, while the UL listing satisfies code inspections that unlisted wire cannot. The jump is worth it when the circuit must pass inspection or survive UV and moisture without degradation.

Build Integration for Low-Voltage Lighting

The reel feeds directly from a Class 2 power supply to LED strips, landscape fixtures or in-wall runs without conduit where code permits. Its two-conductor layout carries a single channel of power, so RGB or tunable-white systems needing extra conductors will require additional cable. The descending foot marks let the installer pull only what the job needs, leaving the rest coiled for future extensions.

Highlights

  • 100 ft reel covers long runs without splicing
  • 18 AWG with 16 stranded pure-copper wires per conductor ensures low resistance
  • 99 % oxygen-free copper maintains signal integrity over distance
  • UL certified to NEC 725 Class 2 for safe in-wall and outdoor installs
  • Sunlight-resistant black PVC jacket protects against UV and weather
  • Sequential 2 ft descending length markings simplify measuring and cutting

Specifications

No published specifications for this item yet.

Questions about this item

What conduit or channel size does the 18 AWG, 16-strand cable need for in-wall runs?

The 18 AWG, 2-conductor cable with 16 strands per conductor fits standard low-voltage conduit; verify local code for fill ratios before pulling.

Which step do installers most often skip when terminating the 99.99% oxygen-free copper conductors?

Stripping each 16-strand conductor cleanly and twisting all strands before inserting into the connector prevents loose strands and high resistance.

What indicates the black PVC jacket needs replacement after outdoor exposure?

Cracking, chalking or loss of sunlight resistance on the UL-certified, NEC 725 Class 2 jacket signals the cable should be replaced.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.