We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black automotive voltmeter with red LED display

Taramp's VTR1000 10 V DC voltmeter electrical system tool

SKU CH-N0S6-D1XS8 MPN VTR1000

Monitors 10 V DC battery voltage with a red LED display in a compact 0.02 kg unit

  • FeaturesWarranty Certificate, [Possibly] Ce, Fcc, Dc, false
  • Height2 L x 3 W x 1 H inches
  • Width2 L x 3 W x 1 H inches
  • Length2 L x 3 W x 1 H inches
  • Weight0.02 kilograms
  • Sports Team1 Piece
  • Monitor battery voltage with a 10 V DC digital readout
  • Red LED display gives clear visibility in any lighting condition
  • Compact 2 x 3 x 1 inch housing fits tight dashboard spaces
  • Lightweight 0.02 kg design adds negligible load to the vehicle
  • Simple installation lets you start measuring electrical voltage immediately

Compact DC voltmeter for automotive systems

The Taramp's VTR1000 is a digital voltmeter designed to measure and monitor battery voltage in 10 V DC automotive electrical systems. Its small footprint allows placement in tight dashboard or console locations. The red LED display provides clear voltage readings at a glance. This tool suits installers and enthusiasts who need a permanent, panel-mounted voltage indicator.

Passive monitoring with minimal electrical load

The unit draws power directly from the DC circuit it measures, so it adds no separate wiring harness or external supply. Red LED illumination remains visible in daylight and low-light conditions without generating noticeable heat. Because the meter is a passive monitoring device, it does not introduce audible noise or measurable parasitic draw during normal operation. Installation requires only a basic two-wire connection to the target circuit.

Warranty certificate included for documentation

The package contains a single VTR1000 voltmeter and a manufacturer warranty certificate. No mounting hardware, connectors, or configuration software are bundled with the unit. The certificate provides the only printed documentation supplied by the manufacturer. Users must source any required terminals, fuses, or panel adapters separately.

Highlights

  • Monitor battery voltage with a 10 V DC digital readout
  • Red LED display gives clear visibility in any lighting condition
  • Compact 2 x 3 x 1 inch housing fits tight dashboard spaces
  • Lightweight 0.02 kg design adds negligible load to the vehicle
  • Simple installation lets you start measuring electrical voltage immediately

Specifications

BrandTaramp's
FeaturesWarranty Certificate, [Possibly] Ce, Fcc, Dc, false
Height2 L x 3 W x 1 H inches
Width2 L x 3 W x 1 H inches
Length2 L x 3 W x 1 H inches
Weight0.02 kilograms
Sports Team1 Piece
TypeVoltmeter

Questions about this item

How do I wire the VTR1000 voltmeter into a 10 V DC system?

Connect the positive lead to the battery positive terminal and the negative lead to ground; the red LED display powers directly from the measured circuit.

What upkeep does the VTR1000 require over time?

No scheduled maintenance is needed; verify the display reads correctly during routine battery checks and replace the unit if the LEDs fail.

At what voltage does the VTR1000 stop showing a reading?

The meter is specified for a minimum operating voltage of 10 V DC, so sustained voltage below that level will cause the display to shut off.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.