We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flatbed SATA duplicator with nineteen vertical drive bays

Systor

Systor 1:19 Flatbed SATA Duplicator & Sanitizer 19 Target 600MB/s

SKU CH-84XA-639H3

Standalone duplicator copies or erases up to 19 SATA drives simultaneously at 600 MB/s with DoD 5220.22-M compliant sanitisation

  • Target1 to 19
  • Data Transfer Rate600MB/s

DATA TRANSFER RATE Flatbed - 36.0GB/min [600MB/sec]

TARGET SIZE 1 to 19

  • Clone up to 19 drives simultaneously with 600MB/s throughput
  • Erase data to DoD 5220.22-M standard for certified sanitisation
  • Standalone operation requires no host computer or software
  • Copy 2.5 and 3.5 SATA drives directly without adapters
  • 36GB per minute transfer rate accelerates large-volume duplication

19-Target SATA Duplicator

The Systor 1:19 flatbed duplicator copies one source SATA drive to as many as 19 targets at once. It handles both 2.5 and 3.5 inch hard drives or solid-state drives without adapters. The unit operates standalone, so no host computer or software is required to start a job.

40mm rear fans and per-port outtake cooling

Dual 40mm rear fans and a dedicated outtake fan behind every drive bay keep temperatures low during extended copy or erase sessions. A high-performance power supply supports continuous operation across all 19 ports. The design moves air through built-in vents to maintain steady throughput.

DoD 5220.22-M erase and dual copy modes

The sanitizer meets DoD 5220.22-M compliance for multi-pass data destruction, leaving no recoverable trace on the media. Copy modes include Systems and Files for data-only cloning or Whole HDD for sector-by-sector duplication including partitions and boot sectors. Both modes work regardless of drive brand, operating system or format.

Highlights

  • Clone up to 19 drives simultaneously with 600MB/s throughput
  • Erase data to DoD 5220.22-M standard for certified sanitisation
  • Standalone operation requires no host computer or software
  • Copy 2.5 and 3.5 SATA drives directly without adapters
  • 36GB per minute transfer rate accelerates large-volume duplication

Specifications

Target1 to 19
Data Transfer Rate600MB/s

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install drives in the flatbed bays and what step is commonly missed?

Place each 2.5 or 3.5 SATA drive directly into a bay without adapters, close the latch, then press the start button; the step often missed is confirming the source drive is in the first bay before starting a 1 to 19 copy session.

What maintenance or replacement will the duplicator need later?

The 40 mm rear fan and the individual outtake fan per port may need cleaning or replacement after extended use to maintain airflow across all 19 bays.

What limit appears first during sustained high-speed duplication?

The 600 MB/s aggregate transfer rate is the ceiling; with 19 targets active the per-drive throughput drops, so total session time is bound by that shared bandwidth.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.