We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flatbed SATA duplicator with eleven open drive bays

Systor

Systor 1:11 Flatbed SATA Duplicator & Sanitizer 600MB/s 11 Target

SKU CH-P4SD-BQF3V

Standalone duplicator copies or securely erases up to eleven 2.5 or 3.5-inch SATA drives at 600 MB/s with DoD 5220.22-M sanitisation

  • Target1 to 11
  • Data Transfer Rate600MB/s

DATA TRANSFER RATE Flatbed - 36.0GB/min [600MB/sec]

TARGET SIZE 1 to 11

  • Standalone operation with no computer required
  • Copies up to 11 drives simultaneously at 600 MB/s
  • Supports 2.5" and 3.5" SATA drives without adapters
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • 36 GB/min throughput with built-in cooling per bay

Standalone 1:11 SATA Duplicator

This standalone duplicator copies one SATA source drive to up to eleven targets at once. It accepts both 2.5 and 3.5 inch drives without adapters and operates without a host computer or software. The unit suits IT teams, forensic labs and data-centre staff who need rapid, simultaneous cloning of mixed-brand HDDs and SSDs.

600 MB/s Interface Limit

The SATA interface caps sustained throughput at 600 MB per second, so aggregate speed is shared across all active target bays. DoD 5220.22-M compliant sanitisation runs multiple overwrite passes, which extends cycle time well beyond a simple copy. Whole-drive duplication copies every sector including empty space, while Systems and Files mode copies only allocated data to reduce duration.

Flatbed Bay Installation

Drives slide into the flatbed bays and lock in place; no caddies, screws or extra cables are required. Rear 40 mm fans and per-port outtake fans provide forced airflow across each drive during long jobs. The main failure points are misaligned SATA connectors on worn drives and thermal throttling when all eleven bays run continuously at maximum throughput.

Highlights

  • Standalone operation with no computer required
  • Copies up to 11 drives simultaneously at 600 MB/s
  • Supports 2.5" and 3.5" SATA drives without adapters
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • 36 GB/min throughput with built-in cooling per bay

Specifications

Target1 to 11
Data Transfer Rate600MB/s

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 1-to-11 target model or a smaller duplicator?

The 1-to-11 target model lets you copy one source drive to up to eleven targets at once, while smaller units handle fewer drives per session.

What does the 600MB/s transfer rate mean when I am actually copying drives?

It means the duplicator can move up to 600 megabytes per second from the source to every target simultaneously, so an 11-drive job finishes at the same per-drive speed as a single-drive job.

Is the SATA interface fast enough for modern SSDs or does it cap the speed?

SATA III tops out at 600MB/s, so the duplicator’s rated 600MB/s matches the interface limit; drives faster than SATA will be bottlenecked to that ceiling.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.