Tripp Lite N201-020-OR network ethernet cable Cat 6 20 ft orange
- Consumer Electronics
- 6
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Syba
Connects a Compact Flash card to a 3.5" IDE interface with Ultra DMA support, voltage selection and LED status indicators
The Syba SD-CF-IDE-A connects a Compact Flash card to a 3.5" IDE host interface. It targets education, IT development and embedded-technology enthusiasts who want to run a CF card as an IDE hard drive. The board measures 70 mm by 63 mm by 0.8 mm and carries LED indicators for power and CF access. A voltage selector supports +3.3 V or +5 V cards and a jumper sets master or slave mode.
Builders working with legacy desktops, industrial PCs, Linux set-top boxes, routers, firewalls or diskless clients can add solid-state storage without mechanical drives. The adapter accepts Compact Flash Type I, Type II and Micro-drive media and supports Ultra DMA transfer mode. It does not allow hot insertion of the CF card, so the host must be powered down before swapping media. Users who need hot-swap capability should look elsewhere.
A 40-way 2.54 mm standard IDE connector fits 3.5" desktop bays, while a 44-way 2 mm laptop IDE connector is available as an option for smaller form factors. Power comes from a floppy-drive style +5 V connector. Mounting holes for a rear bracket are also provided as an option. This connector combination decides whether the adapter fits the target host.
| Brand | SYBA |
|---|---|
| Model | SD-CF-IDE-A |
| Color | Black |
| Changer Type | IDE to Compact Flash |
| Features | Specification: Board size: 2.76" x 2.48" x 0.03" (W, L, T) On-board LED indicators for power-on and compact flash access Voltage selection for +3.3V or +5V compact flash Master or slave mode selection Power input: +5V, floppy disk drive power connector Fully compatible with Compact Flash Type I, Type II, and Micro-drive 40-way (2.54mm) standard IDE connector 44-way (2mm) laptop IDE connector (optional) Mounting holes for rear bracket (optional) This adapter does NOT support hot insertion of CF cards System Requirement: PC or Mac with one IDE connector MS Windows, Mac OS, Linux operat |
| Weight | 0.1 |
| Shipping weight | 0.01 kg |
| Package size | 160 × 142 × 41 mm |
The compact 70 mm by 63 mm board fits easily within a standard 3.5 inch bay and includes mounting holes for an optional rear bracket.
It provides a 40-way 2.54 mm connector for desktop IDE and an optional 44-way 2 mm connector for laptop IDE.
The adapter includes mounting holes for an optional rear bracket to secure it in a 3.5 inch bay.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?