We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SXDOOL

SXDOOL U92T12MUB7-53 9025 92mm DC12V 0.25A 3-pin case fan

SKU CH-EK9W-VFYAG

A 92 mm square, 25 mm thick DC 12 V case fan with a 3-pin connector drawing 0.25 A

  • NIDEC motor delivers reliable cooling performance
  • Compact 92mm square frame fits tight chassis spaces
  • 25mm thickness suits standard case fan mounts
  • DC12V 0.25A draws minimal power from supply
  • 3-pin connector enables direct motherboard control

Compact 92 mm DC12 V case fan for tight builds

The SXDOOL U92T12MUB7-53 is a 92 mm square frame fan that runs on 12 V DC and draws 0.25 A through a standard three-pin connector. Its 25 mm thickness fits the 9025 form factor used in many small-form-factor cases, projector chassis and industrial enclosures where airflow must be moved through restricted space.

Simple three-pin mounting with polarity care

Installation is a matter of aligning the three-pin header with the motherboard or controller socket and securing the fan with four 90 mm mounting holes. The only common issue is reversing the connector; the keyed header prevents damage but the fan will not spin until the plug is seated in the correct orientation.

Steady low-current airflow under continuous duty

At a constant 0.25 A draw the motor maintains its rated speed without thermal throttling during prolonged operation. The low current profile means minimal voltage drop on long cable runs, so airflow remains consistent whether the fan is exhausting a compact GPU zone or circulating air in a projector housing.

Highlights

  • NIDEC motor delivers reliable cooling performance
  • Compact 92mm square frame fits tight chassis spaces
  • 25mm thickness suits standard case fan mounts
  • DC12V 0.25A draws minimal power from supply
  • 3-pin connector enables direct motherboard control

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the fan is spinning correctly once connected to a 12 V 3-pin header?

The fan should rotate smoothly and draw roughly 0.25 A at 12 V; listen for steady airflow and check the motherboard’s fan-speed readout for a stable RPM value.

What comes in the box and are mounting screws or a 4-pin adapter required separately?

The package contains the 92 mm × 92 mm × 25 mm fan with a 3-pin connector; screws and any 4-pin adapter are not included and must be sourced separately.

Should I choose the 90 mm or 92 mm frame size for my case?

Both 90 mm and 92 mm dimensions refer to the same U92T12MUB7-53 model; verify your mounting holes match 92 mm spacing before ordering.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.