We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board diagnostic card with digital display and multiple connectors

SXDOOL

SXDOOL TL611 Pro PCI PCI-E mini PCI-E LPC Diagnostic Card motherboard accessory

SKU CH-1BEC-MW252

Multi-interface diagnostic card with dual hexadecimal POST displays and 15 test functions for PCI, PCIe, mini PCIe and LPC motherboards

  • Diagnoses system faults in seconds with 15-feature debug capability
  • Reads POST error codes via dual hexadecimal dot-matrix displays
  • Tests all PCI slots plus PCIe x1 and LPC interfaces
  • Automatic LPC detection identifies motherboard pinout without manual setup
  • Built-in 3VSB and MOBO power indicators verify rail health

Multi-bus Diagnostic Card

The SXDOOL TL611 Pro is a motherboard accessory that plugs into PCI, PCI-E x1, mini PCI-E and LPC interfaces. It is for technicians and enthusiasts who need to read POST error codes on both desktop and laptop platforms without swapping multiple tools. The card ships in black or green at random.

Thermals, Noise and Power

The card draws its operating power directly from the bus and includes a 3VSB indicator to confirm that standby voltage is present. A MOBO LED shows whether the motherboard power rail is normal. No fan or active cooling is fitted, so the device adds no audible noise to the test bench.

Upgrade Path and Limits

This model replaces the older TL460S and adds automatic LPC detection across fifteen supported board brands. It is not for users who require BIOS-level firmware flashing or voltage measurement beyond the 3VSB rail. The jump is worthwhile when a single card must cover legacy PCI, modern PCI-E and proprietary LPC debug headers.

Highlights

  • Diagnoses system faults in seconds with 15-feature debug capability
  • Reads POST error codes via dual hexadecimal dot-matrix displays
  • Tests all PCI slots plus PCIe x1 and LPC interfaces
  • Automatic LPC detection identifies motherboard pinout without manual setup
  • Built-in 3VSB and MOBO power indicators verify rail health

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the TL611 Pro diagnostic card in a desktop PCI slot?

Align the card with any standard PCI slot, press firmly until the gold fingers seat fully, then secure the bracket screw. The dual 2.0 mm and 2.54 mm pin headers on the card are for LPC cables only — do not force them into the PCI slot.

What maintenance will the TL611 Pro need over time?

No scheduled maintenance is required. Keep the gold fingers and pin headers free of dust with compressed air. If the 3VSB power indicator or MOBO status LED stops lighting, the card itself may need replacement.

What is the first limit I will hit when running the TL611 Pro continuously?

The card draws power from the motherboard's 3VSB rail. On systems with a weak standby supply, the voltage indicator may drop after extended POST looping, signalling the rail's current limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.