We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic 50mm square case fan with 2-pin connector

SXDOOL

SXDOOL SXD5010S12M 50mm 10mm 12V 2-pin case fan

SKU CH-VFH9-DDXRM

A 50 mm slim case fan with oil bearing, 12 V 2-pin power and 4500 RPM airflow for computer cooling

  • Slim 10mm profile fits tight chassis spaces
  • 12V 0.10A draw keeps power load low
  • 4500RPM speed delivers 11.2CFM airflow
  • Oil bearing runs quietly for case cooling
  • Two-pin connector plugs straight into motherboard headers

50 mm 12 V 2-pin case fan

The SXDOOL SXD5010S12M is a 50 mm square axial fan with a 10 mm slim profile. It runs on 12 V DC at 0.10 A and spins at 4500 RPM to deliver 11.2 CFM of airflow. The oil bearing and plastic frame keep operation quiet for computer case ventilation.

Replaces larger or thicker fans

This slim 10 mm unit fits where standard 25 mm fans cannot, making it a direct swap for tight clearance spots such as small form factor cases or GPU shrouds. The jump is worth it when the existing cooler is too thick or when a 2-pin header is the only power source available.

Simple two-wire installation

The 2-pin connector plugs straight onto a 12 V motherboard or controller header with no PWM signal required. Ensure the header supplies 12 V DC; a 5 V or variable header will not start the motor. Oil bearings need no lubrication, but dust buildup on the blades can reduce airflow over time.

Highlights

  • Slim 10mm profile fits tight chassis spaces
  • 12V 0.10A draw keeps power load low
  • 4500RPM speed delivers 11.2CFM airflow
  • Oil bearing runs quietly for case cooling
  • Two-pin connector plugs straight into motherboard headers

Specifications

No published specifications for this item yet.

Questions about this item

Will the 50 mm square frame and 10 mm depth fit my case fan slot?

The fan measures 50 mm by 50 mm with a 10 mm thick plastic frame, so it fits any standard 50 mm mounting hole pattern.

How do I connect the 2-pin power lead and avoid the common polarity mistake?

Plug the 2-pin connector into a 12 V DC header; the keyed housing prevents reverse insertion, so just align the notch and press firmly.

When should I replace the oil-bearing fan to keep airflow at 11.2 CFM?

Oil bearings typically run quietly for several years; replace the unit once noise rises or speed drops below the rated 4500 RPM.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.