We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two square 120 mm fans with translucent blades, black frames, RGB LEDs visible, small remote control included

SXDOOL

SXDOOL RGB120MM2PCS 120 mm RGB case fan 2-pack with remote

SKU CH-XKTM-4Q843

Two 120 mm RGB case fans with hydraulic bearings, 600-1200 RPM speed range and remote control for colour and speed adjustment

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Air Flow20-25 CFM
  • Noise Level25 - 30 dBA
  • Vivid RGB lighting with remote colour control
  • Quiet hydraulic bearing runs at 28 dBA
  • PWM speed range 600 to 1200 RPM
  • 34 CFM airflow for effective cooling
  • 40000-hour bearing life for lasting reliability

Two-pack 120 mm RGB case fans

This twin-pack supplies two 120 mm RGB case fans with a dedicated remote controller. Hydraulic bearings and a rated 40 000-hour lifetime target long-term reliability. The fans suit builders adding colour-coordinated airflow to a standard ATX chassis. They are not for buyers who need higher static pressure for dense radiators.

PWM speed range and airflow limits

Speed varies between 600 and 1 200 RPM with a ten-per-cent tolerance, delivering 20.34 CFM at 28 dBA. The hydraulic bearing keeps noise low but caps peak airflow below what high-static-pressure designs achieve. The mini 6-pin connector requires the supplied remote hub, so direct motherboard PWM headers cannot be used. Builders needing software sync via 5 V ARGB or 12 V RGB headers should look elsewhere.

Mini 6-pin connector dependency

Each fan draws 0.19 A at 12 V DC for the motor and 0.23 A at 5 V DC for the LEDs, combining to 2.3 W total. Power and control run through a single mini 6-pin plug that mates only with the included remote box. Without that hub the fans cannot receive power or PWM signals, so the remote is a mandatory component, not an optional accessory.

Highlights

  • Vivid RGB lighting with remote colour control
  • Quiet hydraulic bearing runs at 28 dBA
  • PWM speed range 600 to 1200 RPM
  • 34 CFM airflow for effective cooling
  • 40000-hour bearing life for lasting reliability

Specifications

BrandSXDOOL
Series120MM
ModelRGB120MM2PCS
TypeCase Fan
CompatibilityCase
Bearing TypeHydraulic
RPM<1600 RPM
Air Flow20-25 CFM
Noise Level25 - 30 dBA
ColorMulticolor
LEDRGB

Questions about this item

Should I choose the 2-pack or buy single fans for my case?

The RGB120MM2PCS is sold as a matched 2-pack with one remote that controls both fans together, so you get synchronised lighting and speed without extra controllers.

What does the 20.34 CFM airflow figure deliver inside a real chassis?

At 20.34 CFM the pair moves enough air for typical mid-tower builds, keeping CPU and GPU temperatures in check during everyday workloads and moderate gaming.

The fan uses a mini 6-pin connector — what does that limit in practice?

The mini 6-pin plugs into the supplied remote controller, which then draws 12 V for the motor and 5 V for the RGB LEDs, so you need the remote in the loop rather than a standard motherboard header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.